View 9914-0500_99484.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEXT
FIND IT
Table of Contents
CLICK FOR PDF FILE
OVERVIEW - Inductive Proximity Sensors
Introduction ........................................4 Operation ............................................5
CLICK FOR PDF FILE
CYLINDRICAL Inductive Proximity Sensors
Introduction/Operation .......................8 Selection Guide, DC styles................12 Selection Guide, AC styles ................14 Product Specifications......................16
LIMIT STYLE Inductive Proximity Sensors
Introduction/Operation .....................68 Selection Guide.................................71 Product Specifications......................72
CLICK FOR PDF FILE
BLOCK STYLE Inductive Proximity Sensors
Introduction/Operation .....................80 Selection Guide.................................82 Product Specifications......................84
CLICK FOR PDF FILE
RING STYLE Inductive Proximity Sensors
Introduction/Operation .....................98 Selection Guide...............................100 Product Specifications....................102
CLICK FOR PDF FILE
ACCESSORIES for Inductive Proximity Sensors
Introduction ....................................113 Mounting Brackets .........................114 Cable Assemblies............................116 Switching Units...............................122 Motion Detectors............................128
OTHER INFORMATION
APPENDIX: IP Codes .........................................132 NEMA requirements .......................133 Cross Reference .............................134 Glossary..........................................135 Conversion Charts ..........................137 INDEX .............................................138 TERMS & CONDITIONS .................141 WARRANTY....................................143
CLICK FOR PDF FILE
All specifications subject to change without notice or obligation
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
3
PREVIOUS
HOME
NEXT
FIND IT
Cylindrical Sensors
8 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
PREVIOUS
CYLINDRICAL INDUCTIVE PROXIMITY SENSORS Altech Cylindrical sensors are available in diameters ranging from 4mm (.16 in.) to 30mm (1.18 in.) with sensing distances up to 40mm (1.57 in.). Most models feature nickel plated brass (BN) housing, but stainless steel (SS) and non-metallic versions are available. Both flush mount and non-flush mount sensors are available. Flush mount versions are often called shielded or embeddable. Non-flush mount sensors are also called non-shielded or nonembeddable. Non-flush sensors have larger sensing distances than their flush mount counterparts. All Inductive sensors meet IP67 (NEMA1, 3, 4, 6, 12, 13) protection levels. Please refer to pages 132-133 of this catalog for more information.
HOME
NEXT
FIND IT
Sensing Distances - AC, DC, Cylindrical Style Sensors Type L Series - Short Body GL Series - 2 LED Standard Series Extended Sensing Range High Speed Plastic & Metal Housing Mini Housing Complementary Output Extended Temperature Range Weld Immune Analog Output Extended Range Plus 2-Wire Namur Voltage DC DC AC, DC DC DC AC, DC DC DC DC AC, DC DC DC DC DC Flush* 1.5 - 10 2 - 10 1.5 - 10 2 - 15 2 2 - 10 0.8 - 1.5 2 - 10 2 - 10 2 - 10 0.5 - 4 3 - 22 2 - 10 2 - 10 4 - 15 4 - 15 4 - 15 7 - 14 6 - 40 4 - 15 4 - 15 4 - 15 Non-Flush* 2 - 15 4 - 15 2 - 15 3
FLUSH MOUNT CYLINDRICAL SENSORS Flush Mounted, sometimes called embedded or shielded sensors, have electromagnetic fields concentrated directly in front of the sensing heads and may be mounted directly into metal mounting brackets or embedded directly into metal without causing a false output. Figure 8 also illustrates that on Cylindrical Flush Mount sensors there should be at least 1 diameter of distance between adjacent sensors, and no non-target metal surfaces should be less than 3 times the sensing distance Sn directly across from the sensing head. Also, two directly opposite sensors mounted in metal should be greater than 6 times the sensing distance apart.
*All Sensing Distances in mm. Operating Voltages - AC, DC Cylindrical Style AC DC 90 - 250VAC 18 - 30VDC 20 - 250VAC 10 - 30VDC 10 - 60VDC
Operating Current- AC, DC Cylindrical Style AC DC 180 mA 5 mA 500 mA 120 mA 200mA 400 mA
Sensor Wiring Systems - AC, DC Cylindrical Style AC DC 2-Wire 2-Wire 3-Wire 4-Wire
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
9
PREVIOUS
NON-FLUSH CYLINDRICAL SENSORS Sometimes called non-embedded or non-shielded, non-flush sensors have electromagnetic fields with a wide sensing angle and are unshielded (no metal surrounding the sensing head). Care must be taken to insure that no non-target metal comes in near proximity to the sensing head. Distances are demonstrated in Figure 8. Adjacent sensors should be separated by at least 2 times the diameter. Non-target metal should be at least 3 times the sensing distance directly across from the sensing head. Two directly opposite sensors should be at least 6 times the sensing distance apart. OUTPUT CONNECTIONS AC,DC - Normally Open (NO), and Normally Closed (NC). DC Namur - Special interface Circuits required. DC Analog - Analog Output 1 to 9V. OUTPUT CABLES Cylindrical Sensors are provided with 2 meter PVC fixed cables. 5 meter PVC, 2 and 5 meter PUR cables are optional and specified by selection of the last two digits of the part number. See chart below. Cable Length & Material 2m PVC 5m PVC 2m PUR 5m PUR Part No. Last Digits 00 02 10 12
HOME
NEXT
FIND IT
Fig. 8
CYLINDRICAL SENSOR INSTALLATION
Flush Mount Installation (Mild Steel)
D 3 x Sn
D
D
Non-Flush Mount Installation (Mild Steel)
3 x Sn D D 2xD D D D
Opposing Installation
D
(Mild Steel)
6 x Sn
D
Quick Disconnect models are designed to be user-friendly and to simplify installations. Please see the product specification for sensors with quick disconnect connectors and matching cable assemblies on pages 116 to 121 in the accessory section.
QUICK DISCONNECT HOUSING MATERIALS CONNECTORS Pulostronic sensors are available in AC - Nickel Plated Brass Trogamid T a wide selection of Quick Teflon Plated Brass Disconnect styles for DC and AC circuits. While virtually any sensor DC - Nickel Plated Brass can be custom manufactured with a Trogamid T Quick Disconnect connector, Altech Teflon Plated Brass offers one of the largest selection of Stainless Steel standard Quick Disconnect models.
10
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
PREVIOUS
HOME
NEXT
FIND IT
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
11
PREVIOUS
HOME
NEXT
FIND IT
DC CYLINDRICAL SENSORS - SELECTION GUIDE
Sensing Distance mm (in.) Series Size (mm)
M8 M12 M18 M30 M12 M18 M30 M8 M12 M18 M30 M8 Extended Sensing 10-30V DC, 200mA * Up to 2x improvement over Standard M12 M18 M30 Metal & Plastic 10-30V DC, 400mA * Extended Length * Higher Current Output Mini Housing 10-30V DC, 200mA * 4, 5, 6.5mm diameter * Includes LED Complementary Switching Output 10-30V DC, 200mA * NO & NC Outputs High Speed 10-30V DC, 200mA * 4,000 Hz Switching Frequency Extended Temperature 10-30V DC, 200mA * -40C to 100C M12 M18 M30 4mm Dia. M5 6.5mm Dia. M12 M18 M30
0.8mm (.03 in.) 1.0mm (.04 in) 1.5mm (.06 in.) 2.0mm (.08 in.) 2.5mm (.10 in.) 3.0mm (.12 in.) 4.0mm (.16 in.) 5.0mm (.20 in.) 6.0mm (.23 in.) 7.0mm (.28 in.) 8.0mm (.32 in.) 10.0mm (.40 iin.) 12.0mm (.47 in.)
L Series 18-30V DC, 120mA * Short Body * Economically priced GL Series 10-60V DC, 400mA * 2 LED's * NO & NC models Standard Series 10-30V DC, 200mA * Most quick disconnects * Industry standard * NO & NC models
*
* * * * * * * * * * *
*
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * *
M12
M12 M18
12
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
PREVIOUS
HOME
NEXT
FIND IT
Mounting
14.0mm (.55 in.) 15.0mm (.59 in.) 20.0mm (.78 in.) 22.0mm (.86 in.) 40.0mm (1.5 in.) Flush
Output Configuration
PNP NO NC
Connection
Cable 2m (6ft.6in.) Quick Disconnect 62 63 64 65
Housing Material
No. of Wires
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
Metal (BN) Brass Nickel Plated NonMetallic
Non-Flush NPN
No. of LED's Page
1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 16 17 18 19 20 21 22 24 25 26 27 28 29 29 30 32 32/33 33 34 34 35 36 37
* * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* * * *
* * * * * * * * * * * * * * * * * * * * * (ss) * * * * * * * * *
*
* * *
* * * *
* * * * * * * *
* * *
* * * * *
* * * * * * * *
1 1 1 1 1 1 1 1 1
* * * * * * * * *
3 3 3 4 4 4
*
* * * * * *
* * * *
3
1
31
3 3
1 1
38 39
Continued on Page 14/15
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
13
PREVIOUS
HOME
NEXT
FIND IT
DC CYLINDRICAL SENSORS - SELECTION GUIDE (Cont.)
Sensing Distance mm (in.) Series
Weld-Immune 10-30V DC, 200mA * Resistant to Electromagnetic Interference * Teflon Plated 2-Wire 5-30V DC, 100mA 10-55V DC, 200mA * Reduce Wiring * Lower Cost Extended Range Plus 10-30V DC, 200mA * Up to 3 times improvement over Standard
Size (mm)
M12 M18 M30 M12 M18 M30 M8 M12 M18 M30
0.8mm (.03 in.)
1.0mm (.04 in)
1.5mm (.06 in.)
2.0mm (.08 in.)
2.5mm (.10 in.)
3.0mm (.12 in.)
4.0mm (.16 in.)
5.0mm (.20 in.)
6.0mm (.23 in.)
7.0mm (.28 in.)
8.0mm (.32 in.)
10.0mm (.40 iin.)
12.0mm (.47 in.)
*
* * * *
*
* * * * * * * * *
Namur Requires External Amplifier * Low Energy Device * Operates in Hazardous Areas Analog 18-30V DC, 5mA * 1-9V Linear Output * Detects Target Distance
M8 M12 M18 M30 M12 M18 M30
*
* * * * * * * *
AC CYLINDRICAL SENSORS - SELECTION GUIDE
Sensing Distance (mm/in.) Series
Standard Series 90-250V AC, 180 mA * Large Selection of Quick Disconnects * NO or NC Outputs Extended Voltage, Metal 20-250V AC, 500 mA * High Current Output * NO or NC Outputs Extended Voltage, Plastic 20-250V AC, 500 mA * High Current Output * NO or NC Outputs Weld Immune 20-250V AC, 300/ 500 mA * Resistance to Electro magnetic interference * Teflon Plated
Mounting
10mm 14.0mm 15.0mm (.40 in.) (.55 in.) (.59 in.) Flush Non-Flush
Size
0.8mm (.03 in.) 1.5mm (.06 in.) 2.0mm (.08 in.) 2.5mm (.10 in.) 4.0mm (.16 in.) 5.0mm (.20 in.) 7.0mm (.28 in.) 8.0mm (.32 in.)
Output Configuration
NO NC
M12 M18 M30 M12 M18 M30 M12 M18 M30 M12 M18 M30
*
* * * * *
*
* * * * *
*
* * * * *
*
* * * * *
* * * * * * * * * * * *
* * * * * * * * * * * *
* * * * * * * * * * * *
* * * * * * * * *
14
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
PREVIOUS
HOME
NEXT
FIND IT
Mounting
14.0mm (.55 in.) 15.0mm (.59 in.) 20.0mm (.78 in.) 22.0mm (.86 in.) 40.0mm (1.5 in.) Flush
Output Configuration
PNP NO NC
Connection
Cable 2m (6ft.6in.) Quick Disconnect 62 63 64 65
Housing Material
No. of Wires
3 3 3 2 2 2 3 3 3 3 2 2 2 2 3 3 3
Metal (BN) Brass Nickel Plated NonMetallic
Non-Flush NPN
No. of LED's
1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
Page
* * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * *
* * *
* * * * * *
* * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * *
40 41 42 54 54 55 46 47 48 49 50 51 52 53 44 44 45
* * * *
* * * *
*
*
Connection
Cable 62 66 67 68
No. of Wires (1)
Housing Material
Metal (BN) Plastic
No. of LED's
1 1 1 1 1 1
Page
56 57 58/59 60 61 62/63 60 61 62/63 64 65 66
* * * * * * * * * * * *
* * *
* * *
* * *
* * * * * *
2 2 2 2 2 2 2 2 2
* * * * * * * * * * * *
1 1 1 1 1 1
* * *
2 2 2
(1) All metal sensors have a 3rd wire for optional system ground.
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
15
PREVIOUS DC - 3 WIRE - L SERIES Brass, Nickel Plated (BN), Cylindrical,Threaded, M8 - 10-30V DC, 200mA M12-M30 - 18-30V DC, 120mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* Short Body Sensors * Economically priced * Connector options * Carries mark
* IEC (529)IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
M8 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9981-2000
M8 Non-Flush Mount
2mm (.08 in.)
65
9981-2065
1.5mm (.06 in.)
64
9981-2064
Cable
9981-2200
64
9981-2264
65
9981-2265
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
9981-2100
9981-2164
9981-2165
9981-2300
9981-2364
9981-2365
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Current Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000Hz 15% 10% .15mm (.006 in.) PBTP
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000Hz 15% 10% .15mm (.006 in.) PBTP
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000Hz 15% 10% .15mm (.006 in.) PBTP
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTP
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTP
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTP
M
M
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
8 x 1
8 x 1
LED
LED
35
4 PORT
LED
64 Style Connector 3-pin, Pico style, 8mm (.31 in.) supplied with non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
4 PORT LED
50 29
50 M 8 x
LED
2 40 4 x 1 1 50 1 23 5 12 x
LED
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
28
16
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
50
5 M M 8 x 1 M 8 x 1 M M 12 x 1 8
35 M 8 x 1 M 8 x 1
30
5
PREVIOUS
HOME
NEXT
FIND IT
Accessories
Metric/in. Conversion Table 1.0 mm 5.0 mm 6.0 mm 8.0 mm 12.0 mm 23.0 mm 24.0 mm 28.0 mm 29.0 mm = .04 in. = .20 in. = .23 in. = .31 in. = .47 in. = .91 in. = .94 in. =1.10 in. =1.14 in. 30.0 mm 34.0 mm 35.0 mm 39.0 mm 40.0 mm 50.0 mm = = = = = = 1.18 in. 1.34 in. 1.37 in. 1.53 in. 1.57 in. 1.96.in.
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
This table converts millimeters to inches in reference to the illustrations included on these pages
M12 Flush Mount
2mm (.08 in.)
Cable
9982-2000
M12 Non-Flush Mount
4mm (.16 in.)
65 Cable
9982-2200
64 Connector 8000-5220 PVC, Straight 64 Connector 8000-5230 PVC, Right Angle, 2LED, PNP 64 Connector 8000-5240 PVC, Right Angle, 2LED, NPN 65 Connector 8000-5110 PVC, Straight 65 Connector 8000-5120 PVC, Right Angle 65 Connector 8000-5150 PVC, Right Angle, 2LED, NPN 65 Connector 8000-5160 PVC, Right Angle, 2LED, PNP Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
64
9982-2064
64
9982-2264
65
9982-2265
9982-2065
Mounting Brackets - see Page 114-115
9982-2100
9982-2164
9982-2165
9982-2300
9982-2364
9982-2365
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 1000Hz 15% 10% .40mm (.016 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 1000Hz 15% 10% .40mm (.016 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 1000Hz 15% 10% .40mm (.016 in.) PBTP
Wiring Diagrams
Note; Wire colors are applicable on cables purchased from Altech.
Note: Sensor dimensions in mm.
PNP
Fixed Cable
BR BK
NPN
Fixed Cable +
BR
M
M 12 x 1
LED
12 x 1
+
LOAD LOAD BK BL
LED
*
35
6
35
* BL - Normally Open
-
Normally Open
M
M 12 x 1
4 PORT LED
12 x 1
64 Connector
1 BR BK +
4- PORT LED
64 Connector
1 BR BK BL 3 -
*+
LOAD
30
6
4 50 0
40
24
2/4 3
LOAD BL * -
2/4
M
50
6
30
24
4 50 0
40
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
50
M 8 x 1
LED
8 x 1
Normally Open
Normally Open
M 12 x 1
LED
M 12
65 Connector
BR + 1
65 Connector
BR 1
x 1
2
*
+ LOAD
4 BK
LOAD 3
4
BK
*
BL
-
2
3 BL
-
M 12 x 1
M 12 x 1
Normally Open
Normally Open
17
PREVIOUS DC - 3 WIRE - L SERIES Brass, Nickel Plated (BN), Cylindrical,Threaded, 18-30V DC, 120mA 1 LED for Ouput Energized
HOME
NEXT
FIND IT
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
* Short Body Sensors * Economically priced * Connector options * Carries mark
M18 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9984-2000
M18 Non-Flush Mount
8mm (.31in.)
Cable
9984-2200
5mm (.20 in.)
65
9984-2065
65
9984-2265
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
9984-2100
9984-2165
9984-2300
9984-2365
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Current Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 1000Hz 15% 10% .50mm (.02 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 1000Hz 15% 10% .50mm (.02 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 500Hz 15% 10% .80mm (.031in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 500Hz 15% 10% .80mm (.031 in.) PBTP
M 18
M
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
18
x 1
x 1
LED
LED
35
35 M M 18 x 18 a 1
LED LED
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
3 40 50 0
18
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
50
3 40 0
8 1 M M 12 x 1 12
PREVIOUS
HOME
NEXT
FIND IT
Accessories
Metric/in. Conversion Table 1.5 mm 2.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm 15.0 mm 18.0 mm = = = = = = = = = = .06 in. .08 in. .16 in .20 in. .23 in. .31 in. .39 in. .47 in. .59 in. .70 in. 23.0 mm 28.0 mm 30.0 mm 32.0 mm 34.0 mm 40.0 mm 50.0 mm 51.0 mm 60.0 mm 80.0 mm = = = = = = = = = = .91 in. 1.10 in 1.18 in. 1.26 in. 1.38 in. 1.57 in. 1.97 in. 2.01 in. 2.36 in. 3.12 in.
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
This table converts millimeters to inches in reference to the illustrations included on these pages
65 Connector 65 Connector 65 Connector 65 Connector
8000-5110 8000-5120 8000-5150 8000-5160
PVC, Straight PVC, Right Angle PVC, Right Angle, 2LED, NPN PVC, Right Angle, 2LED, PNP
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M30 Flush Mount
10mm (.39 in.)
Cable
9986-2000
M30 Non-Flush Mount
15mm (.59 in.)
Cable
9986-2200
65
9986-2065
65
9986-2265
Mounting Brackets - see Pages 114-115
9986-2100
9986-2165
9986-2300
9986 -2365
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 500Hz 15% 10% 1.0mm (.039 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 500Hz 15% 10% 1.0mm (.039 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 300Hz 15% 10% 1.5mm (.059 in.) PBTP
10% 18V - 30V 10 mA 120 mA 1.5V 10 A 300Hz 15% 10% 1.5mm (.059 in.) PBTP
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable on cables purchased from Altech
M
M 30 x 1
30 x 1. 5
LED
LED
PNP
Fixed Cable
BR
NPN
Fixed Cable +
BR
*
+
LOAD
12
BK LOAD BK BL
35
BL
*-
-
23
Normally Open
Normally Open
M
M 30
LED
30 x 1.
x
LED
5
12
1. 5 M 12
65 Connector
BR + 1
65 Connector
BR 1
*
+ LOAD
4 BK
LOAD
4
BK
2
3
*
BL
-
2
3 BL
-
3 40 0
18
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
50
50
40
M 12 x 1
x 1
Normally Open Normally Open
19
PREVIOUS DC - 3 WIRE - GL SERIES Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-60V DC, 400mA, 2 LED's for Operating Voltage and Output Energized
HOME
NEXT
FIND IT
* Higher Current Output * Higher Voltage Range * Carries mark
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
M12 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9982-4000 9982-4400 9982-4100 9982-4500 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTP
M12 Non-Flush Mount
4mm (.16 in.)
65 Cable
9982-4200 9982-4600 9982-4300 9982-4700 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 1000Hz 15% 10% .40mm (.016 in.) PBTP
2mm (.08 in.)
64
9982-4064 9982-4464 9982-4164 9982-4564 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTP 9982-4065 9982-4465 9982-4165 9982-4565 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTP
64
9984-4264 9982-4664 9982-4364 9982-4764 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 1000Hz 15% 10% .40mm (.016 in.) PBTP
65
9982-4265 9982-4665 9982-4365 9982-4765 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 1000Hz 15% 10% .40mm (.016 in.) PBTP
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Current Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
M
M 12 x 1
2 LED
12 x 1
2 LED
45 35
45 M 12 12 x 1
2 LED
29 x 1
2 LED
2 LED
5 35 60 0
2 LED
5 35 60 0
20
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
2 59 60 0
65 Style Connectors 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
6
60 M 12 x 1
2 50 9 1
64 Style Connector 3-pin, Pico style, 8mm (.31 in.) supplied with Brass, Nickel Plated (BN) locknuts.
M 8 x 1
6 M 8 x M 12 x 1
6 M
PREVIOUS
HOME
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table 1.0 mm = .04 in. 6.0 mm = .23 in. 8.0 mm = .31 in. 12.0 mm = .47 in. 18.0 mm = .70 in. .27.0 mm =1.06 in. 29.0 mm 35.0 mm 45.0 mm 50.0 mm 60.0 mm 80.0 mm = = = = = = 1.14 in 1.37 in. 1.77 in. 1.97 in. 2.36 in. 3.15 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
64 Connector 64 Connector 64 Connector
8000-5220 PVC, Straight 8000-5230 PVC, Right Angle, 2LED, PNP 8000-5240 PVC, Right Angle, 2LED, NPN
M18 Flush Mount
5mm (.20 in.)
Cable
9984-4000 9984-4400 9984-4100 9984-4500 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 1000Hz 15% 10% .25mm (.01 in.) PBTP
M18 Non-Flush Mount
8mm (.31 in.)
Cable
9984-4200 9984-4600 9984-4300 9984-4700 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 500Hz 15% 10% .40mm (.016 in.) PBTP
65 Connectors, 4 PIN - 3 Wire cable (PIN 1, 3, 4 ) : 65 Connector 8000-5110 PVC, Straight 65 Connector 8000-5120 PVC, Right Angle 65 Connector 8000-5150 PVC, Right Angle, 2LED, NPN 65 Connector 8000-5160 PVC, Right Angle, 2LED, PNP 65 Connectors, 4 PIN - 4 Wire cable (PIN 1, 2, 3, 4) : 65 Connector 8000-5280 PVC Right Angle
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
65
9984-4065 9984-4465 9984-4165 9984-4565 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 1000Hz 15% 10% .25mm (.01 in.) PBTP
65
9984-4265 9984-4665 9984-4365 9984-4765 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 500Hz 15% 10% .40mm (.016 in.) PBTP
Mounting Brackets - see Pages 114-115
Wiring Diagrams
Note: Wire colors are applicable on cables purchased from Altech
PNP
Fixed Cable
BR BK LOAD BL
NPN
Fixed Cable +
BR
*
+
LOAD
BK BL
*-
-
Normally Open
Normally Open
Fixed Cable
BR BK LOAD BL
Fixed Cable +
BR
*
+
LOAD BK BL
*
-
-
Normally Closed
Normally Closed
Note: Sensor dimensions in mm.
64 Connector
1 BR + 2/4 3 BK 2/4 LOAD BL * - BK BL -
64 Connector
1 BR
M 18 x 1
2 LED
M 18 x 1
*+
LOAD
2 LED
8
3
3 45 5
45
27
Normally Open
Normally Open
64 Connector
1 BR BK 2/4 3 LOAD BL* - +
64 Connector
1 BR BK BL 3 -
*+
LOAD
2/4
Normally Closed
Normally Closed
65 Connector
BR + 1
65 Connector
BR 1
*
+ LOAD
4 BK
LOAD
4
BK
2
3
*
BL
-
2
3 BL
-
Normally Open
M 18 x 1
Normally Open
M 18 x 1
2 LED
2 LED
1
65 Connector
BR + 1 BL - LOAD
65 Connector
BR
*
+ LOAD BL -
4 *
4
50 35
2 50 7
8
2
3 WHT
2
3 WHT
60
60
Normally Closed
Normally Closed
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
21
PREVIOUS DC - 3 WIRE - GL SERIES Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-60V DC, 400mA 2 LED's for Operating Voltage and Output Energized
HOME
NEXT
FIND IT
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
* Higher Current Output * Higher Voltage Range * Carries mark
M30 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9986-4000 9986-4400 9986-4100 9986-4500 10% 10V-60V 10 mA 400 mA 2.4V 10 A 500 Hz 15% 10%
M30 Non-Flush Mount
15mm (.59 in.)
Cable
9986-4200 9986-4600 9986-4300 9986-4700 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 300 Hz 15% 10% .75mm (.030 in.) PBTB
10mm (.39 in.)
65
9986-4065 9986-4465 9986-4165 9986-4565 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 500 Hz 15% 10% .50mm (.020 in.) PBTP
65
9986-4265 9986-4665 9986-4365 9986-4765 10% 10V - 60V 10 mA 400 mA 2.4V 10 A 300 Hz 15% 10% .75mm (.030 in.) PBTB
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
.50mm (.020 in.)
PBTP
Note: Sensor dimensions in mm.
M
M 30 x
30 x
3 45 5
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
1,
1, 5
5
2 LED
2 LED
23 45 M 30 x 1, 5 5
2 LED
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
2 LED
50 35
60
22
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
60
50
23
12
12 M 30 x 1,
PREVIOUS
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 65 Connectors, 4 PIN - 3 Wire cable (PIN 1, 3, 4) : 65 Connector 8000-5110 PVC, Straight 65 Connector 8000-5120 PVC, Right Angle 65 Connector 8000-5150 PVC, Right Angle, 2LED, NPN 65 Connector 8000-5160 PVC, Right Angle, 2LED, PNP 65 Connectors, 4PIN - 4 Wire cable (PIN 1, 2, 3, 4) : 65 Connectors 8000-5280 PVC, Right Angle
HOME
NEXT
FIND IT
Metric/in. Conversion Table 1.5 mm 12.0 mm 23.0 mm 35.0 mm = .06 in. = .47 in. = .90 in. = 1.37 in. 45.0 mm = 1.77 in. 50.0 mm = 1.96 in. 60.0 mm = 2.36 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
Mounting Brackets - see Pages 114-115
Wiring Diagrams
Note: Wire colors are applicable on cable purchased from Altech
PNP
Fixed Cable
BR BK LOAD BL
NPN
Fixed Cable +
BR
*
+
LOAD
BK BL
*-
-
Normally Open
Normally Open
Fixed Cable
BR BK LOAD BL
Fixed Cable +
BR
*
+
LOAD BK BL
*
-
-
Normally Closed
Normally Closed
65 Connector
BR + 1
65 Connector
BR 1
*
+ LOAD
4 BK
LOAD
4
BK
2
3
*
BL
-
2
3 BL
-
Normally Open
Normally Open
65 Connector
BR 1 + 1 BL *- LOAD
65 Connector
BR
*
+ LOAD BL -
4
4
2
3 WHT
2
3 WHT
Normally Closed
Normally Closed
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
23
PREVIOUS DC - 3 WIRE STANDARD Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200 mA, 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
* Most complete range of Fixed Cable and Quick Disconnect Styles * Available in normally open (N.O.) and normally closed (N.C.) output configuration * Industry standard 10-30V DC operating voltage and 200mA output current * Carries mark
M8 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9961-0200 9961-4400 9961-0300 9961-4500 10% 10V-30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .15mm (.006 in.) PBTP 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% 9961-0363
M8 Non-Flush Mount
2mm (.08 in.)
65
9961-0265 9961-4465 9961-0365 9961-4565 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10%
1.5mm (.06 in.)
63
9961-0263
64
9961-0264 9961-4464 9961-0364 9961-4564 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10%
Cable
9961-0400 9961-4600 9961-0500 9961-4700 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .20mm (.008in.) PBTB
63
9961-0463
64
9961-0464 9961-4664
65
9961-0465 9961-4665 9961-0565 9961-4765 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .20mm (.008in.) PBTB
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
9961-0563
9961-0564 9961-4764
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10%
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10%
.15mm (.006 in.) .15mm (.006 in.) .15mm (.006in.) PBTP PBTP PBTP
.20mm (.008in.) .20mm (.008in.) PBTB PBTB
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
M
M 8 x 1
LED
8 x 1
LED
40
35 43 M 8 x 1
4 PORT LED
43
5 M 8 x 1
4 PORT LED
64 Style Connector 3-pin, Pico style, 8mm (.31 in.) supplied with non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
50 34
LED (65 CN)
50 1 M 8 x 1 50 1 23 5 x
LED (65 CN) LED (63 CN)
63 and 65 Style Connectors 4-pin, Micro style, 12mm (.47 in.) supplied with Non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30. The 63 Connector is clear, offering 360 LED viewing.
LED (63 CN)
28
50
24
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
29 M 8 x M 8 x 1 M 12
5 M 8 x 1 M 12 x 1
PREVIOUS
HOME
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 64 Connector 8000-5220 PVC, Straight 64 Connector 8000-5230 PVC, Right Angle, 2LED, PNP 64 Connector 8000-5240 PVC, Right Angle, 2LED, NPN 63/65 Connectors, 4 PIN - 3 Wire cable (PIN 1, 3, 4) : 63/65 Connector 8000-5110 PVC, Straight 63/65 Connector 8000-5120 PVC, Right Angle 63/65 Connector 8000-5150 PVC, Right Angle, 2LED, NPN 63/65 Connector 8000-5160 PVC, Right Angle, 2LED, PNP 63/65 Connectors, 4PIN - 4 Wire cable (PIN 1, 2, 3, 4) : 63/65 Connectors 8000-5280 PVC, Right Angle Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
Metric/in. Conversion Table 1.0 mm 5.0 mm 6.0 mm 8.0 mm 12.0 mm 23.0 mm 28.0 mm = .04 in. = .20 in. = .23 in. = .31 in. = .47 in. = .90 in. =1.10 in. 29.0 mm 34.0 mm 35.0 mm 40.0 mm 43.0 mm 50.0 mm 60.0 mm = = = = = = = 1.14 in. 1.34 in. 1.37 in. 1.57 in. 1.69 in. 1.47 in. 2.36 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
M12 Flush Mount
2mm (.08 in.)
Cable
9962-4000 9962-4400 9962-4100 9962-4500 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% 9962-4163
M12 Non-Flush Mount
4mm (.16 in.)
65
9962-4065 9962-4465 9962-4165 9962-4565 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10%
63
9962-4063
64
9962-4064 9962-4464 9962-4164 9962-4564 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10%
Cable
9962-4200 9962-4600 9962-4300 9962-4700 10% 10V - 30V 10 mA 200 mA 2.4V 10A 1000 Hz 15% 10%
63
9962-4263
64
9962-4264 9962-4664
65
9962-4265 9962-4665 9962-4365 9962-4765 10% 10V - 30V 10 mA 200 mA 2.4V 10A 1000 Hz 15% 10%
Mounting Brackets - see Pages 114-115
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
9961-4363
9962-4364 9962-4764
10% 10V - 30V 10 mA 200 mA 2.4V 10A 1000 Hz 15% 10%
10% 10V - 30V 10 mA 200 mA 2.4V 10A 1000 Hz 15% 10%
PNP
Fixed Cable
BR BK LOAD
NPN
Fixed Cable +
BR
*
+
LOAD
BK BL
* BL - Normally Open
-
Normally Open
Fixed Cable
BR BK LOAD
Fixed Cable +
BR
*
+
.20mm (.008in.) .20mm (.008in.) .20mm (.008in.) .20mm (.008in.) PBTB PBTB PBTB PBTB
.40mm (.016in.) .40mm (.016in.) .40mm (.016in.) .40mm (.016in.) PBTB PBTB PBTB PBTB
LOAD BK BL
BL
*
-
-
Note: Sensor dimensions in mm.
Normally Closed
Normally Closed
64 Connector
1 BR BK 2/4 LOAD BL * - +
64 Connector
1 BR BK BL 3 -
M
M 12 x 1
LED
12 x 1
*+
LOAD
LED
2/4
6
3
40
Normally Open
Normally Open
34
64 Connector
1 BR BK 2/4 3 LOAD BL* - +
64 Connector
1 BR BK BL 3 -
*+
LOAD
M 12 x
M 12 x
2/4
4 PORT LED
4 PORT LED
4 50 0
34
6
50
1
1
Normally Closed
Normally Closed
63/65 Connector
BR + 1
63/65 Connector
BR 1
60
60
LED (63 CN)
6
4 50 0
34
50
60
60
M 8
(c)Altech
M 8
*
+ LOAD
x 1
LED (65 CN)
x 1
4 BK
LOAD
4
BK
2
3
*
BL
-
2
3 BL
-
LED (65 CN)
Normally Open
Normally Open
M
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
M 12 x 1
12 x 1
63/65 Connector
BR 1 + 1 BK - LOAD
LED (63 CN)
65 Connector
BR
*
+ LOAD BL -
4 *
4
2
3 WHT
2
3 WHT
Normally Closed
Normally Closed
25
PREVIOUS DC - 3 WIRE - STANDARD Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA, 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
* Most complete range of Fixed Cable and Quick Disconnect Styles * Available in normally open (N.O.) and normally closed (N.C.) output configuration * Industry standard 10-30V DC operating voltage and 200mA output current * Carries mark
M18 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9964-4000 9964-4400 9964-4100 9964-4500 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .25mm (.01 in.) PBTP 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .25mm (.01 in.) PBTP 9964-4163
M18 Non-Flush Mount
8mm (.31 in.)
65
9964-4065 9964-4465 9964-4165 9964-4565 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 1000 Hz 15% 10%
5mm (.20 in.)
63
9964-4063
Cable
9964-4200 9964-4600 9964-4300 9964-4700 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 500 Hz 15% 10% .40mm (.016 in.) PBTB
63
9964-4263
65
9964-4265 9964-4665
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
9964-4363
9964-4365 9964-4765
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 500 Hz 15% 10% .40mm (.016 in.) PBTB
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 500 Hz 15% 10% .40mm (.016 in.) PBTB
.25mm (.01 in.) PBTP
M
M
18
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
18 x 1
LED
x 1
LED
40
32
LED (65 CN)
LED (65 CN)
x 1
40 M 18 x 1 5 60 1 8
4 50 60 1
63 and 65 Style Connectors 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.The 63 Connector is clear, offering 360 LED viewing.
LED (63 CN)
LED (63 CN)
26
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
32 M 12 x 1
8 M 18 M 12 x 1
PREVIOUS
HOME
NEXT
FIND IT
Accessories
Metric/in. Conversion Table 1.5 mm 2.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm 15.0 mm 18.0 mm = = = = = = = = = = .06 in. .08 in. .16 in .20 in. .23 in. .31 in. .39 in. .47 in. .59 in. .70 in. 23.0 mm 28.0 mm 30.0 mm 32.0 mm 34.0 mm 40.0 mm 50.0 mm 51.0 mm 60.0 mm 80.0 mm = = = = = = = = = = .91 in. 1.10 in 1.18 in. 1.26 in. 1.34 in. 1.57 in. 1.97 in. 2.01 in. 2.36 in. 3.12 in.
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
This table converts millimeters to inches in reference to the illustrations included on these pages
63/65 Connectors, 4 PIN - 3 Wire cable (PIN 1, 3, 4) : 63/65 Connector 8000-5110 PVC, Straight 63/65 Connector 8000-5120 PVC, Right Angle 63/65 Connector 8000-5150 PVC, Right Angle, 2LED, NPN 63/65 Connector 8000-5160 PVC, Right Angle, 2LED, PNP 63/65 Connectors, 4PIN - 4 Wire cable (PIN 1, 2, 3, 4) : 63/65 Connectors 8000-5280 PVC, Right Angle
Change last digit of connector number to 5 for 5 meter cable
M30 Flush Mount
10mm (.39 in.)
Cable
9966-4000 9966-4400 9966-4100 9966-4500 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 500 Hz 15% 10% .50mm (.02 in.) PBTB 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 500 Hz 15% 10% .50mm (.02 in.) PBTB 9966-4163
M30 Non-Flush Mount
15mm (.59 in.)
65 Cable
9966-4200 9966-4600 9966-4300 9966- 4700 10% 10V - 30V 10 mA 200 mA 2.4V 10A 300 Hz 15% 10% .75mm (.03 in.) PBTB 10% 10V - 30V 10 mA 200 mA 2.4V 10A 300 Hz 15% 10% .75mm (.03 in.) PBTB
Refer to pages 116-121 for more cable information
63
9966-4063
63
9966-4263
65
9966-4265 9966-4665 9966-4365 9966-4765 10% 10V - 30V 10 mA 200 mA 2.4V 10A 300 Hz 15% 10% .75mm (.03 in.) PBTB
9966-4065 9966-4465 9966-4165 9966-4565 10% 10V - 30V 10 mA 200 mA 2.4V 10 A 500 Hz 15% 10% .50mm (.02 in.) PBTB
Mounting Brackets - see Pages 114-115
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
Note: Sensor dimensions in mm.
PNP
Fixed Cable
BR
NPN
Fixed Cable +
BR
*
+
LOAD
M
M 30 x 1, 5
LED
BK LOAD BK BL
30 x 1, 5
LED
* BL - Normally Open
-
Normally Open
12
Fixed Cable
BR
Fixed Cable +
BR
40
28
40
*
+
BK LOAD BL BK BL
LOAD
*
-
-
Normally Closed
Normally Closed
63/65 Connector
BR +
63/65 Connector
BR 1
LED (65 CN) LED (65 CN)
*
+ LOAD
1
4 BK
LOAD
4
BK
M
M 30 x 1, 5
30 x 1, 5
*
LED (63 CN)
LED (63 CN)
2
3
BL
-
2
3 BL
-
Normally Open
Normally Open
12
63/65 Connector
BR 1 + 1 BL - LOAD
63/65 Connector
BR
4 50 60 1
28
*
+ LOAD BL -
M
5 60 1
M
(c)Altech
12
12 x 1
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
x 1
4 *
4
2
3 WHT
2
3 WHT
Normally Closed
Normally Closed
27
PREVIOUS DC - 3 WIRE - EXTENDED SENSING DISTANCE Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
* Up to 2 times sensing distance over standard sensors * Reduces accidental collisions * Ideal for applications where larger sensing distance is required but mounting space is tight * Carries mark
M8 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9981-4000
M8 Non-Flush Mount
3mm (.12 in.)
65 Cable
9981-4200
2mm (.08 in.)
64
9981-4064 9981-4065
64
9981-4264
65
9981-4265
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
9981-4100
9981-4164
9981-4165
9981-4300
9981-4364
9981-4365
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 10V-30V 12 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .2mm (.008 in.) PBTP
10% 10V - 30V 12 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .2mm (.008 in.) PBTP
10% 10V - 30V 12 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .2mm (.008 in.) PBTP
10% 10V - 30V 12 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .3mm (.012 in.) PBTB
10% 10V - 30V 12 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .3mm (.012 in.) PBTB
10% 10V - 30V 12 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .3mm (.012 in.) PBTB
M
M
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
8
8 x 1
LED
x 1
35
35 M 8
8
5 x 1 2 50 9
LED
LED
M x 1
64 Style Connector 3-pin, Pico style, 8mm (.31 in.) supplied with non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
LED
LED
50 34
LED
50/65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Non-Metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
28
50
28
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
50 1
23 M 12 x
5 M 12 x 1
5
M 8 x 1 M 8 x 1
M 8 x 1
M 8 x 1
PREVIOUS
HOME
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table 1.0 mm 5.0 mm 8.0 mm 12.0 mm 23.0 mm 27.0 mm 28.0 mm = .04 in. = .20 in. = .31 in. = .47 in. = .90 in. =1.06 in. =1.10 in. 29.0 mm 30.0 mm 34.0 mm 35.0 mm 40.0 mm 50.0 mm = = = = = = 1.14 in. 1.18 in. 1.33 in. 1.37 in. 1.57 in. 1.96 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
64 Connector 64 Connector 64 Connector
8000-5220 PVC, Straight 8000-5230 PVC, Right Angle, 2LED, PNP 8000-5240 PVC, Right Angle, 2LED, NPN PVC, Straight PVC, Right Angle PVC, Right Angle, 2LED, NPN PVC, Right Angle, 2LED, PNP
50/65 Connector 8000-5110 50/65 Connector 8000-5120 50/65 Connector 8000-5150 50/65 Connector 8000-5160
M12 Flush Mount
4mm (.16 in.)
Cable
9982-4900
M18 Flush Mount
8mm (.31 in.)
Cable
9984-4900
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
65
9982-4950
65
9984-4950
Mounting Brackets - see Pages 114-115
10% 10V - 30V 12mA 200 mA 2.4V 10 A 1500 Hz 15% 10% .40mm (.016 in.) PBTB
10% 10V - 30V 12 mA 200 mA 2.4V 10 A 1500 Hz 15% 10% .40mm (.016 in.) PBTB
10% 10V - 30V 12 mA 200 mA 2.4V 10A 500 Hz 15% 10% .80mm (.03 in.) PBTB
10% 10V - 30V 12 mA 200 mA 2.4V 10A 500 Hz 15% 10% .80mm (.03in.) PBTB
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
Note: Sensor dimensions in mm.
PNP
Fixed Cable
BR BK LOAD BL
NPN
Fixed Cable +
BR
*
+
LOAD
BK BL
*-
-
Normally Open
Normally Open
64 Connector
1 BR BK 2/4 3 BL * - LOAD +
64 Connector
1 BR BK BL 3 -
*+
LOAD
2/4
Normally Open
Normally Open
50/65 Connector
BR + 1
50/65 Connector
BR 1
*
+ LOAD
4 BK
LOAD
4
BK
2
3
*
BL
-
2
3 BL
-
Normally Open
Normally Open
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
29
PREVIOUS DC - 3 WIRE - EXTENDED SENSING DISTANCE Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA 1 LED for Ouput Energized
HOME
NEXT
FIND IT
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
* Up to 2 times sensing distance over standard sensors * Reduces accidental collisions * Ideal for applications where larger sensing distance is required but mounting space is tight * Carries mark
M30 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9966-3900
Metric/in. Conversion Table 1.5 mm 30.0 mm 50.0 mm 60.0 mm 80.0 mm = = = = = .06 in. 1.20 in. 1.47 in. 2.36 in. 3.12 in.
15mm (.59 in.)
65
9966-3965
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
This table converts millimeters to inches in reference to the illustrations included on these pages
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 10V-30V 12 mA 200 mA 2.4V 10 A 200 Hz 15% 10% 1.5mm (.06 in.) PBTP
10% 10V - 30V 12 mA 200 mA 2.4V 10 A 200 Hz 15% 10% 1.5mm (.06 in.) PBTP
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 65 Connector 8000-5110 PVC, Straight 65 Connector 8000-5120 PVC, Right Angle 65 Connector 8000-5150 PVC, Right Angle, 2LED, NPN 65 Connector 8000-5160 PVC, Right Angle, 2LED, PNP
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
Mounting Brackets - see Pages 114-115
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
M
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
30 x 1, 5
PNP
Fixed Cable
BR BK LOAD
LED
+
5 60 0
BL
*-
Normally Open
M 30 x 1, 5
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
LED
1
65 Connector
BR +
4 BK
LOAD
2
3
*
BL
-
60
Normally Open
30
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
80
PREVIOUS DC - 3 WIRE HIGH SPEED Brass, Nickel Plated (BN), Cylindrial,Threaded, 10-30V DC, 200mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
Metric/in. Conversion Table 1.0 mm 12 mm 40.0 mm 45.0 mm 50.0 mm 65.0 mm = = = = = = .04 in. .47 in. 1.57 in. 1.77 in. 1.96 in. 2.55 in.
* Switching frequency of 4000 Hz * Standard body length * Carries mark
M12 Flush Mount
Sensing Distance
Cable or Connector Style Cat.No. Cable
9962-2300
2mm (.08 in.)
65
9962-2365
PNP
Normally Open
This table converts millimeters to inches in reference to the illustrations included on these pages
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 10V-30V 10 mA 200 mA 2.4V 10 A 4000 Hz to DIN 500 10 15% 10% .20mm (.008 in.) PBTP
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 4000 Hz to DIN 500 10 15% 10% .20mm (.008 in.) PBTP
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 65 Connector 8000-5110 PVC, Straight 65 Connector 8000-5120 PVC, Right Angle 65 Connector 8000-5150 PVC, Right Angle, 2LED, NPN 65 Connector 8000-5160 PVC, Right Angle, 2LED, PNP
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
Mounting Brackets - see Pages 114-115
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
M 12
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
x 1
LED
PNP
40
Fixed Cable
BR
+
50
BK LOAD BL
*-
Normally Open
M 12 x 1
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
LED
65 Connector
45
BR + 1
4 BK
LOAD
65
2
3
*
BL
-
Normally Open
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
31
PREVIOUS DC - 3 WIRE - PLASTIC & METAL HOUSING - Brass, Nickel Plated (BN), and Plastic (TROGAMID T) Cylindrical,Threaded, 10-30V DC, 400mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
* Metal and plastic housings * Higher output currents, 400mA * Long body length * Carries mark
M12 Flush Mount
Sensing Distance
Cable or Connector Cat. No.
M12 Non-Flush Mount
4mm (.16 in.)
Cable
9962-3300 9962-1600
M18 Flush Mount
5mm (.20 in.)
Cable
9964-3100 9964-1500
2mm (.08 in.)
Cable
9962-3100 9962-1400
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
9962-3200
9962-1500
9962-3400
9962-1700
9964-3200
9964-1600
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Current Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material Housing Material
10% 10-30V 10 mA 400 mA 2.4V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTB Trogamid T
10% 10-30V 10 mA 400 mA 2.4V 10 A 2000Hz 15% 10% .20mm (.008 in.) PBTB Nickel Plated Brass
10% 10-30V 10 mA 400 mA 2.4V 10 A 1000Hz 15% 10% .40mm (.016 in.) PBTB Trogamid T
10% 10-30V 10 mA 400 mA 2.4V 10 A 1000Hz 15% 10% .40mm (.016 in.) PBTB Nickel Plated Brass
10% 10-30V 10 mA 400 mA 2.4V 10 mA 1000Hz 15% 10% .5mm (.02 in.) PBTB Trogamid T
10% 10-30V 10 mA 400 mA 2.4V 10mA 1000Hz 15% 10% .5mm (.02 in.) PBTB Nickel Plated Brass
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with non-metallic locknuts for Trogamid T housings, and Brass, Nickel Plated (BN) locknuts for Nickel Plated Brass housings.
M 12 x 1
M
M
12 x 1
18 x 1
LED
LED
LED
6
50
32
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
50
5 60 0
40
34
PREVIOUS
HOME
NEXT
FIND IT
Accessories
Metric/in. Conversion Table 1 mm 1.5 mm 6.0 mm 8.0 mm 12.0 mm 18.0 mm 30.0 mm = .04 in. = .06 in. = .23 in. = .31 in. = .47 in. = .70 in. =1.20 in. 34.0 mm 38.0 mm 40.0 mm 42.0 mm 50.0 mm 60.0 mm = = = = = = 1.31 in. 1.50 in. 1.57 in. 1.65 in. 1.97 in. 2.36 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
Mounting Brackets - see Pages 114-115
M18 Non-Flush Mount M30 Flush Mount
8mm (.31 in.)
Cable
9964-3300 9964-1700 9966-3100
M30 Non-Flush Mount
15mm (.59 in.)
Cable
9966-3300 9966-1300
10mm (.39 in.)
Cable
9966-1100
9964-3400
9964-1800
9966-3200
9966-1200
9966-3400
9966-1400
10% 10-30V 10 mA 400 mA 2.4V 10mA 500Hz 15% 10% .8mm (.03 in.) PBTB Trogamid T
10% 10-30V 10 mA 400 mA 2.4V 10mA 500Hz 15% 10% .8mm (.03 in.) PBTB Nickel Plated Brass
10% 10-30V 10 mA 400 mA 2.4V 10mA 500Hz 15% 10% 1.0mm (.04 in) PBTB Trogamid T
10% 10-30V 10 mA 400 mA 2.4V 10mA 500Hz 15% 10% 1.0mm (.04 in) PBTB Nickel Plated Brass
10% 10-30V 10 mA 400 mA 2.4V 10mA 300Hz 15% 10% 1.5mm (.06 in) PBTB Trogamid T
10% 10-30V 10 mA 400 mA 2.4V 10mA 300Hz 15% 10% 1.5mm (.06 in) PBTB Nickel Plated Brass
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
PNP
M 18 x 1
M 30 x 1, 5 M 30 x 5 1,
NPN
Fixed Cable +
BR BR BK LOAD BK BL
Fixed Cable
*
+
LOAD
LED
LED
42
8
LED
12
5 60 0
BL
60 38
*-
60
-
Normally Open
Normally Open
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
33
PREVIOUS DC - 3 WIRE MINI METAL HOUSING Cylindrical, 10-30V DC, 200mA LED for Output Energized
HOME
NEXT
FIND IT
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
* 4mm, 5mm, and 6.5mm diameter * Economically Priced * Non-connector models feature polyurethane (PUR) cables * Carries mark
O 4 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9980-1010
M5 Flush Mount
0.8mm (0.03 in.)
Cable
9980-2010
0.8mm (0.03 in.)
64
9980-1064
64
9980-2064
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
9980-1110
9980-1164
9980-2110
9980-2164
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material Housing Material
10% 10V-30V 10 mA 200 mA 2V 100 A 5000 Hz Typ. 5% 10%
10% 10V - 30V 10 mA 200 mA 2V 100 A 5000 Hz Typ. 5% 10% .04mm (.003 in.) PBTP Nickel Plated Brass
10% 10V - 30V 10 mA 200 mA 2V 100 A 5000 Hz Typ. 5% 10% .04mm (.003in.) PBTB Nickel Plated Brass
10% 10V - 30V 10 mA 200 mA 2V 100 A 5000 Hz Typ. 5% 10% .04mm (.003in.) PBTB Nickel Plated Brass
.04mm (.003 in.)
PBTP Nickel Plated Brass
M 5
18
25
LED
64 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts for M5 model.
LED
25 M O 5 4 x 5 0, 19 18 19 38
34
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
38
23 M 8 x 1
18
M 8 x1
20
18
Fixed Cable PUR 2m (6 ft. 6 in.).Supplied with Brass, Nickel Plated (BN) locknuts for M5 model.
LED
LED
x
O 4
0, 5
PREVIOUS
HOME
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table .5 mm = 1.0 mm = 3.5 mm = 4.0 mm = 5.0 mm = 6.5 mm = 8.0 mm = .019in. .04 in. .13 in .15 in. .19 in. .25 in. .31 in. 19.0 mm 20.0 mm 23.0 mm 25.0 mm 35.0 mm 40.0 mm 43.0 mm = .74 in. = .78 in = .90 in. = .94 in. = 1.37 in. = 1.57 in. = 1.69 in.
This table converts millimeters to inches in reference to the illustrations included in this catalog
64 Connector 64 Connector 64 Connector
8000-5220 PVC, Straight 8000-5230 PVC, Right Angle, 2LED, PNP 8000-5240 PVC, Right Angle, 2LED, NPN
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
O 6.5 Flush Mount
1.5mm (0.06 in.)
Cable
9961-1200
O 6.5 Non-Flush Mount
3.0mm (0.11 in.)
Cable
9961-1300
65
9961-1264
65
9961-1364
Mounting Brackets - see Pages 114-115
10% 10V - 30V 8 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .15mm (.006in.) PBTB Stainless Steel
10% 10V - 30V 8 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .15mm (.006in.) PBTB Stainless Steel
10% 10V - 30V 8 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .15mm (.006in.) PBTB Stainless Steel
10% 10V - 30V 8 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .15mm (.006in.) PBTB Stainless Steel
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cabl;e purchased from Altech
PNP
NPN
Fixed Cable +
BR BR BK LOAD BL BK BL
O 6, 5
LED
Fixed Cable
LED
5
*
+
LOAD
35
40
*-
40
-
Normally Open
Normally Open
O 6, 5
64 Connector
1 BR +
64 Connector
1 BR BK BL 3 -
5
LED
LED
*+
LOAD
BK 2/4 BL * - LOAD 2/4
49 35
3
49 40
Normally Open
Normally Open
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
35
PREVIOUS DC - 4 WIRE - COMPLEMENTARY OUTPUTS (N.O. & N.C.) Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA 1 LED for Output Energized
HOME
mark
NEXT
FIND IT
* Carries
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
M12 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9962-6200
M12 Non-Flush Mount
4mm (.16 in.)
Cable
9962-6300
2mm (.08 in.)
65
9962-6265
65
9962-6365
PNP NPN
(Complementary NO/NC) (Complementary NO/NC)
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 10V-30V 15 mA 200 mA 2.4V 10 A 2000 Hz 15% 10%
10% 10V - 30V 15 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .20mm (.008 in.) PBTP
10% 10V - 30V 15 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .40mm (.016 in.) PBTB
10% 10V - 30V 15 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .40mm (.016 in.) PBTB
.20mm (.008 in.)
PBTP
M 12
M 12
x 1
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
5 60 0
4 60 4
M
LED
6 M 12 7 80 0 54 6
x 1
LED
12
36
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
6 70 80 0
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
LED
LED
PREVIOUS
HOME
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table 1.0 mm = .04 in. 6.0 mm = .23 in. 8.0 mm = .31 in. 10.0 mm = .39 in. 12.0 mm = .47 in. 18.0 mm = .70 in. 32.0 mm = 1.26 in. 42.0 mm= 1.65 in. 44.0 mm 50.0 mm 51.0 mm 54.0 mm 60.0 mm 70.0 mm 80.0 mm = = = = = = = 1.73 in. 1.96 in. 2.0 in. 2.12 in. 2.36 in. 2.75 in. 3.12 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
65 Connectors, 4PIN - 4 Wire cable (PIN 1, 2, 3, 4) : 65 Connectors 8000-5280 PVC, Right Angle
Change last digit of connector number for 5 meter cable Refer to pages 116-121 for more cable information
M18 Flush Mount
5mm (.2 in.)
Cable
9964-6200
M18 Non-Flush Mount
8mm (.31 in.)
Cable
9964-6300
Mounting Brackets - see Pages 114-115
65
9964-6265
65
9964-6365
10% 10V - 30V 15 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .5mm (.02 in.) PBTB
10% 10V - 30V 15 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .5mm (.02 in.) PBTB
10% 10V - 30V 15 mA 200 mA 2.4V 10A 500 Hz 15% 10% .8mm (.031 in.) PBTB
10% 10V - 30V 15 mA 200 mA 2.4 V 10A 500 Hz 15% 10% .8mm (.031 in.) PBTB
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
M 18 x 1
M 18 x 1
PNP
LED LED
8
Cable Connector BR +
BK (N.O.) WH (N.C.) LOAD BL
50
60
60
42
*
-
*
PNP
x 1 1
65 Connector
M 18 x 1
M M 18 18
LED
LED
1
BR
+
4 BK(N.O.)
LOAD
8
80
80
(N.C.) WHT
2
3
*
BL
LOAD
-
10
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
10
37
PREVIOUS DC - 3 WIRE - EXTENDED TEMPERATURE RANGE Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* Temperature Range: -40 to 100C (104 to 212F) * Carries mark
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance
M12 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9962-6010
M12 Non-Flush Mount
4mm (.16 in.)
Cable
9962-6110
2mm (.08 in.)
65
9962-6065
65
9962-6165
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 10V-30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10%
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 2000 Hz 15% 10% .20mm (.008 in.) PBTP
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .40mm (.016 in.) PBTB
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .40mm (.016 in.) PBTB
.20mm (.008 in.)
PBTP
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
M 12 x 1
M 12 x 1
LED
LED
40
34 M 12 12 x 1 x
6 M 1
LED LED
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
4 50 0
38
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
60
60
50
34
6
PREVIOUS
HOME
NEXT
FIND IT
Accessories
Metric/in. Conversion Table 1.0 mm 6.0 mm 8.0 mm 12.0 mm 18.0 mm = = = = = .04 in. .23 in. .31 in. .47 in. .70 in. 32.0 mm 34.0 mm 40.0 mm 50.0 mm 51.0 mm 60.0 mm = = = = = = 1.23 in. 1.31 in. 1.39 in. 1.47 in. 1.59 in. 2.36 in.
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
This table converts millimeters to inches in reference to the illustrations included on these pages
65 Connector 65 Connector 65 Connector 65 Connector
8000-5110 8000-5120 8000-5150 8000-5160
PVC, Straight PVC, Right Angle PVC, Right Angle, 2LED, NPN PVC, Right Angle, 2LED, PNP
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M18 Flush Mount
5mm (.20 in.)
Cable
9964-6010
M18 Non-Flush Mount
8mm (.31 in.)
Cable
9964-6110
65
9964-6065
65
9964-6165
Mounting Brackets - see Pages 114-115
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .50mm (.02 in.) PBTB
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 1000 Hz 15% 10% .50mm (.02 in.) PBTB
10% 10V - 30V 25 mA 200 mA 2.4V 10A 500 Hz 15% 10% .80mm (.03 in.) PBTB
10% 10V - 30V 25 mA 200 mA 2.4V 10A 500 Hz 15% 10% .80mm (.03 in.) PBTB
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
PNP
1
Fixed Cable
BR
M
M 18 x 1
LED
18 x
LED
+
8
BK
40
32
40
LOAD BL
*-
Normally Open
M
M 18 x 1
18 x 1
65 Connector
BR + 1
LED
LED
4 BK
LOAD
8
4 50 60 1
5 60 1
32
2
3
*
BL
-
M
(c)Altech
12 x 1
Normally Open
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
M 12 x 1
39
PREVIOUS DC - 3 WIRE - WELD IMMUNE Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
* Circuitry that protects for electro-magnetic interference * Flush models have teflon ceramic coatings to protect for weld slag * Carries mark
M12 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No.
M12 Non-Flush Mount
4mm (.16 in.)
45 Cable
9962-5900
2mm (.08 in.)
Cable
9962-5840 9962-5845
65
9962-5965
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material Housing Material
10% 10V-30V 10 mA 200 mA 2.4V 10 A 15 Hz 15% 10%
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 15 Hz 15% 10% .20mm (.008 in.) Teflon Teflon Plated Brass
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 15Hz 15% 10% .40mm (.016 in.) PBTB Nickel Plated Brass
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 15 Hz 15% 10% .40mm (.016 in.) PBTB Nickel Plated Brass
.20mm (.008 in.)
Teflon Teflon Plated Brass
M
M 12
12
10
10
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
x
x 1
1
50
50 M 12
6 x 1 10 70 6
LED
LED
M 12 x 1
45/65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
LED
LED
40
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
10
70
PREVIOUS
HOME
NEXT
FIND IT
Accessories
Metric/in. Conversion Table 1.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm = = = = = .04 in. .23 in. .31 in. .39 in. .47 in. 50.0 mm 52.0 mm 60.0 mm 70.0 mm 80.0 mm = = = = = 1.47 in. 2.04 in. 2.36 in. 2.75 in. 3.12 in.
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
This table converts millimeters to inches in reference to the illustrations included on these pages
45/65 Connector 8000-5110 45/65 Connector 8000-5120 45/65 Connector 8000-5150 45/65 Connector 8000-5160
PVC, Straight PVC, Right Angle PVC, Right Angle, 2LED, NPN PVC, Right Angle, 2LED, PNP
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M18 Flush Mount
5mm (.20 in.)
Cable
9964-5840
M18 Non-Flush Mount
8mm (.31 in.)
Cable
9964-5900
Mounting Brackets - see Pages 114-115
45
9964-5845
65
9964-5965
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 15 Hz 15% 10% .50mm (.02 in.) Teflon Teflon Plated Brass
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 15 Hz 15% 10% .50mm (.02 in.) Teflon Teflon Plated Brass
10% 10V - 30V 10 mA 200 mA 2.4V 10A 15 Hz 15% 10% .80mm (.03 in.) PBTB Nickel Plated Brass
10% 10V - 30V 10 mA 200 mA 2.4V 10A 15 Hz 15% 10% .80mm (.03 in.) PBTB Nickel Plated Brass
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
M
PNP
Fixed Cable
BR
18 x
M 18 x 1
1
LED
LED
+
8
BK LOAD BL
*-
60
10
60
Normally Open
10
M M
M 18 x x 1
LED
18 18 x 1 1
65 Connector
BR + 1
8
LED
4 BK
LOAD
2
3
*
BL
-
80
Normally Open
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
10
10
80
41
PREVIOUS DC - 3 WIRE - WELD IMMUNE Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* Circuitry that protects for electro-magnetic interference * Flush models have teflon ceramic coatings to protect for weld slag * Carries mark
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
M30 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No.
M30 Non-Flush Mount
15mm (.59 in.)
Cable
9966-5900
10mm (.39 in.)
Cable
9966-5840
45/65
9966-5845
65
9966-5965
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material Housing Material
10% 10V-30V 10 mA 200 mA 2.4V 10 A 15 Hz 15% 10%
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 15 Hz 15% 10% 1.0mm (.039 in.) Teflon Teflon Plated Brass
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 15 Hz 15% 10% 1.5mm (.059 in.) PBTB Nickel Plated Brass
10% 10V - 30V 10 mA 200 mA 2.4V 10 A 15Hz 15% 10% 1.5mm (.059 in.) PBTB Nickel Plated Brass
1.0mm (.039 in.)
Teflon Teflon Plated Brass
Note: Sensor dimensions in mm.
M
M 30
30
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
x
x 1, 5
LED
1, 5
LED
60
10
10
60
12
M 30
M 30 x 1, 5
LED
x 1, 5
45/65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
LED
80
10
42
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
10
80
12
PREVIOUS
Metric/in. Conversion Table 1.5 mm = .06 in. 10.0 mm = .39 in. 12.0 mm = .47 in. 30.0 mm =1.20 in. 60.0 mm = 2.36 in. 80.0 mm= 3.15 in.
HOME
NEXT
FIND IT
This table converts millimeters to inches in reference to the illustrations included on these pages
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 45/65 Connector 8000-5110 45/65 Connector 8000-5120 45/65 Connector 8000-5150 45/65 Connector 8000-5160 PVC, Straight PVC, Right Angle PVC, Right Angle, 2LED, NPN PVC, Right Angle, 2LED, PNP
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
Mounting Brackets - see Pages 114-115
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
PNP
Fixed Cable
BR BK LOAD BL
+
*-
Normally Open
65 Connector
BR + 1
4 BK
LOAD
2
3
*
BL
-
Normally Open
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
43
PREVIOUS DC ANALOG SENSORS Cylindrical,Threaded Brass, Nickel Plated (BN), 18-30V DC Analog Output 1V - 9V M12, M18, M30 M30 4 Bit Digital & Analog Output
HOME
NEXT
FIND IT
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Temperature Range: -25 to 70C (-13 to 158F)
* Output voltage proportional to target distance * Ideal for determining position information * Excellent linearity 3% * Shielded cable ouputs on cable models * Carries mark
M12 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Voltage Range Supply Current Max. Load Current Max. Switching Frequency Temperature Drift Repeatability Front Cap Material Output Voltage Range
M18 Flush Mount
1mm (.04 in.) to 4mm (.16 in.)
Cable
9914-0900 18V - 30V 10 mA 5 mA 100 Hz 0.3V 1% PBTB 1-9V DC
0.5mm (.02 in.) to 2.5mm (0.1 in.)
Cable
9914-0800 18V-30V 10 mA 5 mA 100 Hz 0.3V
65
9914-0865 18V - 30V 10 mA 5 mA 100 Hz 0.3V 1% PBTP 1-9V DC
65
9914-0965 18V - 30V 10 mA 5 mA 100 Hz 0.3V 1% PBTB 1-9V DC
1%
PBTP 1-9V DC
M 12 x 1
M 18 x 1
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
7 80 0
7 80 0
M 12 x 1
M 18 x 1
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
80
44
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
10 80 0
10
0
PREVIOUS
1.0 mm 1.5 mm 10.0 mm 12.0 mm 18.0 mm 30.0 mm
HOME
NEXT
FIND IT
Accessories
Metric/in. Conversion Table = .04 in. = .06 in. = .40 in. = .47 in. = .70 in. =1.20 in. 58.0 mm = 2.28 In. 70.0 mm = 2.75 in. 80.0 mm = 3.12 in. 100.0mm = 3.94 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 65 Connectors, 4PIN - 4 Wire cable (PIN 1, 2, 3, 4) : 65 Connectors 8000-5280 PVC, Right Angle
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M30 Non-Flush Mount
7mm (.28 in.) to 14mm (.55 in.)
Cable
9914-1000 18V - 30V 10 mA 5 mA 30 Hz 0.3V 1% PBTB 1-9V DC & 4 Bit Digital
Cable
9914-0500 18V - 30V 10 mA 5 mA 30 Hz 0.3V 1% PBTB 1-9V DC
65
9914-0565 18V - 30V 10 mA 5 mA 30 Hz 0.3V 1% PBTB 1-9V DC
The analog output voltage can be digitized by the 8100-2100 switching unit and 8100-2400/2500 modules. (Separate Accessory items - refer to pages 125 & 126 for more information.)
Mounting Brackets - see Pages 114-115
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
Note: Sensor dimensions in mm.
Fixed Cable M12, M18, M30
BR
+
12
M 30
WHT
x 1, 5
*
*
SHIELD WIRE
LOAD BL
-
Fixed Cable M30
80
58
7 CONDUCTOR CABLE
BR
+
GREY YEL PNK GR
4 BIT DIG. OUTPUT
WHT
*
*
BL SHIELD WIRE
LOAD
-
65CN M12, M18, M30
BR + 1
4 BK
LOAD
* 2
3
BL -
WHT * Pin 2 connected internally to Pin 3. (Can be used as shield with shielded cable)
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
45
PREVIOUS DC - 3WIRE EXTENDED RANGE PLUS Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* Up to 3 times the sensing distance * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Sensing ranges from 3mm (.12 in.) to * Ideal for applications where large 40mm (1.57 in.) sensors will not fit * Short Circuit Protection * Carries mark
* Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
M8 Flush Mount
Sensing distance
Cable or Connector Style Cat. No. Cable
9981-5000
M8 Non-Flush Mount
6mm (0.2 in.)
65
9981-5065
3mm (0.1 in.)
64
9981-5064
Cable
9981-5200
64
9981-5264
65
9981-5265
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Housing Material Repeatability
20% 10-30V 20mA 200mA 2.4V 100A 1000Hz 10% 10% Nickel Plated Brass .15mm (.005 in.)
20% 10-30V 20mA 200mA 2.4V 100A 1000Hz 10% 10% Nickel Plated Brass .15mm (.005 in.)
20 10-30V 20mA 200mA 2.4V 100A 1000Hz 10% 10% Nickel Plated Brass .15mm (.005 in.)
20% 10-30V 20mA 200mA 2.4V 100A 500Hz 10% 10% Nickel Plated Brass .3mm (.01 in.)
20% 10-30V 20mA 200mA 2.4V 100A 500Hz 10% 10% Nickel Plated Brass .3mm (.01 in.)
20% 10-30V 20mA 200mA 2.4V 100A 500Hz 10% 10% Nickel Plated Brass .3mm (.01 in.)
M 8
LED LED
M 8
Fixed Cable PVC 2m (6 ft. 6 in.). Supplied with Brass, Nickel Plated (BN) locknuts.
45
64 Connector 3-pin, Pico style, 8mm (.31 in.) supplied with Brass, Nickel Plated (BN) locknuts.
LED
45
M 8
LED
LED
4
46 5 60 4
LED
x 1
M 8 x 1
65 Style Connectors 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
4 66 58 4
46
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
44 70 62 1
4 M 12 x 1 M 12 x
5 64 8
M 8 x 1
46 M 8 x 1
x 1
4 M 8 x 1
M 8
x 1
x 1
PREVIOUS
1.0 mm 4.0 mm 6.0 mm 8.0 mm 12.0 mm 40.0 mm 44.0 mm 45.0 mm 50.0 mm = = = = = = = = = .04 in. .16 in .23 in. .31 in. .47 in. 1.39 in. 1.73 in. 1.77 in. 1.97 in.
HOME
52.0 mm 54.0 mm 56.0 mm 58.0 mm 60.0 mm 62.0mm 66.0 mm 70.0 mm = = = = = = = = 2.04 in. 2.12 in. 2.20 in. 2.28 in. 2.36 in. 2.44 in. 2.60 in. 2.75 in.
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 64 Connector 8000-5220 PVC, Straight 64 Connector 8000-5230 PVC, Right Angle, 2LED,PNP 64 Connector 8000-5240 PVC, Right Anglr, 2 LED, NPN 65 Connector 8000-5110 PVC, Straight 65 Connector 8000-5120 PVC, Right Angle 65 Connector 8000-5150 PVC, Right Angle, 2LED NPN 65 Connector 8000-5160 PVC, Right Angle, 2LED PNP
Metric/in. Conversion Table
This table converts millimeters to inches in reference to the illustrations included on these pages
M12 Flush Mount
6mm (0.2 in.)
Cable
9982-5000
M12 Non-Flush Mount
10mm (0.4 in.)
Cable
9982-5200
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
Mounting Brackets - see Pages 114-115 65
65
9982-5065
9982-5265
Flush Installation Non-Flush Installation
2d Sn d 2d
20% 10-30V 20mA 200mA 2.4V 100A 800Hz 10% 10% Nickel Plated Brass .3mm (.01 in.)
20% 10-30V 20mA 200mA 2.4V 100A 800Hz 10% 10% Nickel Plated Brass .3mm (.01 in.)
20% 10-30V 20mA 200mA 2.4V 100A 400Hz 10% 10% Nickel Plated Brass .5mm (.02 in.)
20% 10-30V 20mA 200mA 2.4V 100A 400Hz 10% 10% Nickel Plated Brass .5mm (.02 in.)
0.2d
d d d
General Mounting - You must maintain minimum distance between adjacent and opposite sensors in addition to non-target metals as specified in the drawings above. Flush mount sensors must extend at least 0.2 times the sensor diameter above the adjacent metal housing. Non-flush mount sensors must extend a distance greater than the sensing distance (Sn). Please contact Altech for any installation assistance
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
Note: Sensor dimensions in mm.
PNP
Fixed Cable
BR
LED
LED
+
6
BK LOAD BL
4 56 0
4 50 0
*-
Normally Open
64 Connector
1 BR BK 2/4 3 LOAD BL * - +
Normally Open
LED
LED
65 Connector
BR + 1
6
4 BK
LOAD
4 58 0
40
5 60 2
2
3
*
BL
-
66
Normally Open
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
3 x Sn Metal Material
M 12 x 1
M 12 x 1 M
M 12 x 1
M 12 x 1
M 12 x 1
12 x 1
47
PREVIOUS DC - 3WIRE EXTENDED RANGE PLUS Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* Up to 3 times the sensing distance * Ideal for applications where large sensors will not fit * Carries mark
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Sensing ranges from 3mm (.12 in.) to 40mm (1.57 in.) * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F)
M18 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Cable
9984-5000
M18 Non-Flush Mount
20mm (0.8 in.)
Cable
9984-5200
12mm (0.4 in.)
65
9984-5065
65
9984-5265
PNP NPN
Normally Open Normally Closed Normally Open Normally Closed
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Housing Material Repeatability
20% 10V-30V 20 mA 200 mA 2.4V 100 A 500 Hz 10% 10% Nickel Plated Brass 0.6mm (.02 in.)
20% 10V - 30V 20 mA 200 mA 2.4V 100 A 500 Hz 10% 10% Nickel Plated Brass 0.6mm (.02 in.)
20% 10V - 30V 20 mA 200 mA 2.4V 100 A 200 Hz 10% 10% Nickel Plated Brass 1mm (.04 in.)
20% 10V - 30V 20 mA 200 mA 2.4V 100 A 200 Hz
10%
10% Nickel Plated Brass 1mm (.04 in.)
M
M 18
LED
18 x
4 50 0
40
LED
LED
65 Style Connectors 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
4 50 0
40
48
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
6 74 0
64
10 M M 12 12 x x 1 1
60
M 18 x 1
10
M 18 x 1
Fixed Cable PVC 2m (6 ft. 6 in.). Supplied with Brass, Nickel Plated (BN) locknuts.
LED
x 1
1
PREVIOUS
HOME
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table 1.0 mm 4.0 mm 6.0 mm 8.0 mm 12.0 mm 40.0 mm 44.0 mm 45.0 mm 50.0 mm = = = = = = = = = .04 in. .16 in .23 in. .31 in. .47 in. 1.57 in. 1.73 in. 1.77 in. 1.97 in. 52.0 mm 54.0 mm 56.0 mm 58.0 mm 60.0 mm 62.0mm 66.0 mm 70.0 mm = = = = = = = = 2.04 in. 2.12 in. 2.20 in. 2.28 in. 2.36 in. 2.44 in. 2.60 in. 2.75 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
65 Connector 65 Connector 65 Connector 65 Connector
8000-5110 8000-5120 8000-5150 8000-5160
PVC, Straight PVC, Right Angle PVC, Right Angle, 2LED NPN PVC, Right Angle, 2LED PNP
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M30 Flush Mount
22mm (0.9 in.)
Cable
9986-5000
M30 Non-Flush Mount
40mm (1.57 in.)
Cable
9986-5200
Mounting Brackets - see Pages 114-115
65
9986-5065
65
9986-5265
Flush Installation Non-Flush Installation
2d 3 x Sn Sn d 2d
20% 10V - 30V 20 mA 200 mA 2.4V 100 A 300 Hz 10% 10% Nickel Plated Brass 1.1mm (.045 in.)
20% 10V - 30V 20 mA 200 mA 2.4V 100 A 300 Hz 10% 10% Nickel Plated Brass 1.1mm (.045 in.)
20% 10V - 30V 20 mA 200 mA 2.4V 100A 100 Hz 10% 10% Nickel Plated Brass 2mm (.078 in.)
20% 10V - 30V 20 mA 200 mA 2.04V 100A 100 Hz 15% 10% Nickel Plated Brass 2mm (.078 in.)
0.2d
d d d
Metal Material
General Mounting - You must maintain minimum distance between adjacent and opposite sensors in addition to non-target metals as specified in the drawings above. Flush mount sensors must extend at least 0.2 times the sensor diameter above the adjacent metal housing. Non-flush mount sensors must extend a distance greater than the sensing distance (Sn). Please contact Altech for any installation assistance
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
M
PNP
M 30
30 x
LED
1.
10
5 60 0
50
LED
70
x 1. 5 M 30 x 1. 5
LED
5
M 30 x 5 1.
Fixed Cable
BR BK LOAD BL
+
*-
Normally Open
LED
65 Connector
BR + 1
4 BK
LOAD
10
5 60 0
70
50
74
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
84
M 12 x 1
2
3
*
BL
-
M 12 x 1
Normally Open
49
PREVIOUS DC - 2 WIRE NAMUR Brass, Nickel Plated (BN), and Plastic (TROGAMID-T) Cylindrical,Threaded
HOME
NEXT
FIND IT
* Low energy device * Operates in hazardous areas with external amplifier * Meets NAMUR regulations and DIN 19234 specifications * Carries mark
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Reverse Polarity Protection * Plastic and Metal Housing according to NAMUR Regulations and DIN 19234 * Temperature Range: -25 to 70C (-13 to 158F) (For extended temperature models of -40C to +125C, consult Altech.)
M8 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Nickel Plated Brass (BN) Plastic (TROGAMID T) Ripple Voltage Voltage Range (supplied by Pulsotronic 8100-2200 Unit) Output Current ( with target detection) Output Current ( no target detection) Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
5% 8.2V DC at 1K 5% 8.2V DC at 1K 0.5 mA 3.5 mA 2000 Hz 15% 10% .1mm (.004 in.) PBTP (Metal Housing)
M8 Non-Flush Mount
2mm (.08 in.)
Cable
9932-0200 9932-1600 15% 8.2V DC at 1K 0.5 mA 3.5 mA 1000 Hz 15% 10% .2mm (.008 in.) PBTP (Metal Housing) 5% 8.2V DC at 1K
1mm (.04 in.)
Cable
9932-0100
65
9932-0165
65
9932-0265
0.5 mA
3.5 mA 2000 0Hz 15% 10%
0.5 mA
3.5 mA 1000 Hz 15% 10% .2mm (.008 in.) PBTP (Metal Housing)
.1mm (.004 in.)
PBTP (Metal Housing)
M
M
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
30
25 30
M 8 x x 1 1 50 1 23 M 12 x 5
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30.
50
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
50
28
5
M 8 M 12 x 1
8 x 1
8 x 1
PREVIOUS
1.0 mm 5.0 mm 6.0 mm 8.0 mm 12.0 mm 23.0mm = = = = = = .04 in. .20 in. .23 in. .31 in. .47 in. .91 in.
HOME
24.0 mm 25.0 mm 28.0 mm 30.0 mm 40.0 mm 50.0 mm = = = = = = .94 in. 1.0 in. 1.16 in 1.20 in. 1.57 in. 1.97 in.
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table
This table converts millimeters to inches in reference to the illustrations included on these pages
65 Connectors, 4 PIN - 4 Wire cable (PIN 1, 2, 3, 4) : 65 Connector 8000-5280 PVC Right Angle
Channge last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M12 Flush Mount
2mm (.08 in.)
Cable
9932-0300 9932-1100 15% 8.2V DC at 1K 5% 8.2V DC at 1K 0.5 mA 3.5 mA 2000 Hz 15% 10% .2mm (.008 in.) PBTP (Metal Housing)
M12 Non-Flush Mount
4mm (.16 in.)
Cable
9932-0400 9932-1000 5% 8.2V DC at 1K 0.5 mA 3.5 mA 1000 Hz 15% 10% .4mm (.016 in.) PBTP (Metal Housing) 5% 8.2V DC at 1K 0.5 mA 3.5 mA 1000 Hz 15% 10% .4mm (.016 in.) PBTP (Metal Housing)
Remote Amplifier - Use 8100-2200, see page 123
65
9932-0365
65
9932-0465
Mounting Brackets - see Pages 114-115
0.5 mA
3.5 mA 2000 Hz 15% 10% .2mm (.008 in.) PBTP (Metal Housing)
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
30
24
6
6
3 40 50 0
24
40
M 12 x 1
M 12 x 1
M 12 x 1
Fixed Cable
BR
+
Remote Amplifier
BL
-
M 12 x 1
1
65 Connector
BR +
4
Remote Amplifier
2
3 WHT -
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
50
M 12 x 1
51
PREVIOUS DC - 2 WIRE NAMUR Brass, Nickel Plated (BN), and Plastic (TROGAMID-T) Cylindrical,Threaded
HOME
NEXT
FIND IT
* Low energy device * Operates in hazardous areas with external amplifier * Meets NAMUR regulations and DIN 19234 specifications * Carries mark
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Reverse Polarity Protection * Plastic and Metal Housing according to NAMUR Regulations and DIN 19234 * Temperature Range: -25 to 70C (-13 to 158F)
M18 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Nickel Plated Brass (BN) Plastic (TROGAMID T) Ripple Voltage Voltage Range (supplied by Pulsotronic 8100-2200 Unit) Output Current ( with target detection) Output Current ( no target detection) Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material Cable
9932-0500 9932-1300 5% 8.2V DC at 1K 0.5 mA 3,5 mA 1000 0Hz 15% 10% 5% 8.2V DC at 1K 0.5 mA 3.5 mA 1000 Hz 15% 10% .5mm (.02 in.) PBTP (Metal Housing)
M18 Non-Flush Mount
8mm (.31 in.)
Cable
9932-0600 9932-1200 5% 8.2V DC at 1K 0.5 mA 3.5 mA 500 Hz 15% 10% .8mm (.03 in.) PBTP (Metal Housing) 5% 8.2V DC at 1K 0.5 mA 3.5 mA 500 Hz 15% 10% .8mm (.03 in.) PBTP (Metal Housing)
5mm (.20 in.)
65
9932-0565
65
9932-0665
.5mm (.02 in.)
PBTP (Metal Housing)
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
M
30
22
M 1 40 22 M 12 x 1
30
18 x 1 8
3 40 50 0
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
52
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
50
8
M 18 x M 12 x 1
M 18 x 1
18 x 1
PREVIOUS
HOME
NEXT
FIND IT
Accessories
Metric/in. Conversion Table 1.0 mm 1.5 mm 8.0 mm 12.0 mm 18.0 mm 22.0 mm = = = = = = .04 in. .06 in. .31 in. .47 in. .70 in. .86 in. 28.0 mm 30.0 mm 40.0 mm 50.0 mm 51.0 mm 60.0 mm = = = = = = 1.16 in 1.20 in. 1.57 in. 1.96 in. 2.00 in. 2.36 in.
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
This table converts millimeters to inches in reference to the illustrations included on these pages
65 Connectors, 4 PIN - 4 Wire cable (PIN 1, 2, 3, 4) : 65 Connector 8000-5280 PVC Right Angle
Change last digit of connector number to 5 for 5 meter cable Refer to page s 116-121 for more cable information
M30 Flush Mount
10mm (.39 in.)
Cable
9932-0700 9932-1500 5% 8.2V DC at 1K 0.5 mA 3.5 mA 500 Hz 15% 10% .1mm (.039 in.) PBTP (Metal Housing) 5% 8.2V DC at 1K 0.5 mA 3.5 mA 500 Hz 15% 10% .1mm (.039 in.) PBTP (Metal Housing)
M30 Non-Flush Mount
15mm (.59 in.)
Cable
9932-0800 9932-1400 5% 8.2V DC at 1K 0.5 mA 3.5 mA 300 Hz 15% 10% 1.5mm (.059 in.) PBTP (Metal Housing) 5% 8.2V DC at 1K 0.5 mA 3.5 mA 300 Hz 15% 10% 1.5mm (.059 in.) PBTP (Metal Housing)
65
9932-0765
65
9932-0865
Remote Amplifier - Use 8100-2200, see page 123
Mounting Brackets - see Pages 114-115
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
M
12
40
28
40
12
M 30 x 1, 5 M 30 x 1, 5 M
30 x 1, 5
Fixed Cable
BR
+
Remote Amplifier
BL
-
M 30 x 1, 5
65 Connector
BR 1 +
4
Remote Amplifier
2
3 WHT -
4 50 60 1
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
4 50 60 1
M 12 x 1
12 x 1
53
PREVIOUS DC - 2 WIRE SENSORS Brass, Nickel Plated (BN), Cylindrical,Threaded, M12 - 5-30V DC, 100mA M18, M30 - 10-55V DC, 200 mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* 2 Wire devices reduce wiring requirements * Economically Priced * Carries mark
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Reverse Polarity Protection * Temperature Range: -25 to 70C (-13 to 158F)
M12 Flush Mount
Sensing distance
Cable or Connector Style Cat. No. Normally Open Normally Closed
M12 Non-Flush Mount
4mm (.16 in.)
Cable
9962-5700
M18 Flush Mount
5mm (0.2 in.)
Cable
9964-5400
2mm (.08 in.)
Cable
9962-5600
65
9962-5665
65
9962-5765
Ripple Voltage Voltage Range Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material
10% 5V-30V 3mA 100mA 5V 0.5mA 500Hz 15% 10% .20mm (.008 in.) PBTP
10% 5V-30V 3mA 100mA 5V 0.5mA 500Hz 15% 10% .20mm (.008 in.) PBTP
10% 5V-30V 3mA 100mA 5V 0.5mA 500Hz 15% 10% .40mm (.016 in.) PBTP
10% 5V-30V 3mA 100mA 5V 0.5mA 500Hz 15% 10% .40mm (.016 in.) PBTP
10% 10V-55V 5mA 200mA 6.5V 1.5mA 1000Hz 15% 10% .40mm (.016 in.) PBTP
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
M
M
12 x
18
M 12 x 1
LED LED
x
1
LED
1
6
45
35
4 50 60 0
65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
45
LED
LED
54
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
60
50
34
6
5 60 0
29 M 12 x 1 M 12 x 1
PREVIOUS
1.5 mm 2.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm 15.0 mm 18.0 mm = = = = = = = = = = .06 in. .08 in. .16 in .20 in. .23 in. .31 in. .39 in. .47 in. .59 in. .70 in.
HOME
23.0 mm 28.0 mm 30.0 mm 32.0 mm 34.0 mm 40.0 mm 50.0 mm 51.0 mm 60.0 mm 80.0 mm = = = = = = = = = = .08 in. 1.10 in 1.18 in. 1.26 in. 1.34 in. 1.57 in. 1.97 in. 2.01 in. 2.36 in. 3.12 in.
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table
This table converts millimeters to inches in reference to the illustrations included on these pages
65 Connector 65 Connector
8000-5110 PVC, Straight 8000-5120 PVC, Right Angle
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M18 Non-Flush Mount M30 Flush Mount M30 Non-Flush Mount
8mm (.31 in.)
Cable
9964-5500
Mounting Brackets - see Pages 114-115
10mm (.39 in.)
Cable
9966-5400
15mm (.59 in.)
Cable
9966-5500
10% 10V-55V 5mA 200mA 6.5V 1.5mA 500Hz 15% 10% .80mm (.03 in.) PBTP
10% 10V-55V 5mA 200mA 6.5V 1.5mA 500Hz 15% 10% 1mm (.039 in.) PBTP
10% 10V-55V 5mA 200mA 6.5V 1.5mA 300Hz 15% 10% 1.5mm (.059 in.) PBTP
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
M
M M
18 x 1
Fixed Cable
BR
30
30 x 1, 5
x 1, 5
LED
LED
LED
+
LOAD
42
8
60
12
5 60 0
38
BL
-
60
65 Connector
BR 1 + LOAD BLK -
4
2
3
(c)Altech
Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
55
PREVIOUS AC - 2 WIRE STANDARD SERIES Brass, Nickel Plated (BN), Cylindrical,Threaded, 90-250V AC, 180 mA, 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Temperature Range: -25 to 70C (-13 to 158F)
* Most complete range of Fixed Cable and Quick Disconnect Styles * Available in normally open (N.O.) and normally closed (N.C.) output configuration * This series features the 360 LED viewing connector type "67" * Carries mark
M12 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Normally Open Normally Closed Voltage Range Operating Frequency Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Short Term Current (20ms 1Hz) Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material Cable
9952-0500
M12 Non-Flush Mount
4mm (.16 in.)
68
9952-0568
2mm (.08 in.)
62
9952-0562
66/67
9952-0566 9952-0567
Cable
9952-0400
62
9952-0462
66/67
9952-0466 9952-0467
68
9952-0468
9952-0900
9952-0966 9952-0967
9952-0968
9952-0800
9952-0866 9952-0867
9952-0868
90V-250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .2mm (.008in.) PBTP
90V - 250V 50/60Hz 5 mA 100 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .2mm (.008in.) PBTP
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .2mm (.008in.) PBTP
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .2mm (.008in.) PBTP
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10%
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10%
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V
1.5mA/110V 1.5mA/110V 1A 15Hz/220V 15% 10% 1A 15Hz/220V 15% 10%
.4mm (.016in.) .4mm (.0016in.) .4mm (.016in.) .4mm (.016in.) PBTB PBTB PBTB PBTB
M
M 12
12
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
x
LED
5 60 0
60
M 12 x 1 M 12 x 1
LED
LED
91
27
10
10
27
91
62 Style Connector 3-pin, Mini style, 25mm (1.0 in.) supplied with Brass, Nickel Plated (BN) locknuts.
26
44
54
54
66/67/68 Style Connectors The 66/67 connectors are 4-pin, (68 connector, 3-pin), Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts. The 67 Connector is clear, offering 360 LED viewing.
LED (66/68 CN) LED (67 CN)
LED (66/68 CN) LED (67 CN)
6 26
6 M 12 x 1 60 34 6
x 1
LED
1
56
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
60
40
M 12 x 1
PREVIOUS
1.0 mm 5.0 mm 6.0 mm 8.0 mm 12.0 mm 23.0 mm 28.0 mm = .04 in. = .20 in. = .23 in. = .31 in. = .47 in. = .90 in. =1.10 in.
HOME
29.0 mm 34.0 mm 35.0 mm 40.0 mm 43.0 mm 50.0 mm 60.0 mm = = = = = = = 1.14 in. 1.34 in. 1.37 in. 1.57 in. 1.69 in. 1.47 in. 2.36 in.
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) AC Cable Assemblies for Quick Disconnect Sensors 62 Connector 8000-5030 66/67 Connector 8000-5060 66/67 Connector 8000-5070 68 Connector 8000-5130 68 Connector 8000-5140 PVC, Straight PVC, Right Angle PVC, Straight PVC Straight Right Angle
Metric/in. Conversion Table
This table converts millimeters to inches in reference to the illustrations included on these pages
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M18 Flush Mount
5mm (0.2 in.)
Cable
9954-2200
M18 Non-Flush Mount
8mm (.31 in.)
68
9954-2268
Mounting Brackets - see Pages 114-115 68
9954-1968
62
9954-2262
66/67
9954-2266 9954-2267
Cable
9954-1900
62
9954-1962
66/67
9954-1966 9954-1967
9954-2600
9954-2666 9954-2667
9954-2668
9954-2500
9954-2568
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .5mm (.02in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .5mm (.02in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .5mm (.02in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .5mm (.02in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .8mm (.031in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .8mm (.031in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .8mm (.031in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3mA/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .8mm (.031in.) PBTB
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
Fixed Cable
BR
Note: Sensor dimensions in mm.
M 18 x 1 M 18 x 1
Fixed Cable
BR
BL LOAD Yellow/GRN
BL LOAD Yellow/GRN
LED
LED
Normally Open
Normally Closed
5 60 0
60
42
8
62 Connector
1 GRN WHT 2 3 BLK LOAD
M
M 1 18 x 1
LED
8 18 x x 1 1
LED
Normally Open
54
8
66/67 Connector
Yell/GRN 4 3 BL 1
54
66/67 Connector
Yell/GRN 4 3 BL 1
91
27
10
10
27 26
91
LED (67 CN)
8
40
3 60 2
60
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
26
2
LOAD BLK
2
BLK LOAD
Normally Open
Normally Closed
LED (66/68 CN)
LED (66/68 CN)
M
M 18 x 1
18 x 1
68 Connector
Red/WHT 3 2 Red GRN 1 LOAD GRN 1
LED (67 CN)
68 Connector
Red/WHT 3 2 Red LOAD
Normally Open
Normally Closed
57
PREVIOUS AC - 2 WIRE STANDARD SERIES Brass, Nickel Plated (BN), Cylindrical,Threaded, 90-250V AC, 180 mA, 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Temperature Range: -25 to 70C (-13 to 158F)
* Most complete range of Fixed Cable and Quick Disconnect Styles * Available in normally open (N.O.) and normally closed (N.C.) output configuration * This series features the 360 LED viewing connector type "67" * Carries mark
M30 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Normally Open Normally Closed Voltage Range Operating Frequency Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Current Short Term Current (20ms 1Hz) Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material Cable
9956-1500
10mm (.39 in.)
62
9956-1562
66
9956-1566
67
9956-1567
68
9956-1568
9956-1900
9956-1968
90V - 250V 50/60Hz 5 mA 180 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% 1mm (.039 in.) PBTP
90V - 250V 50/60Hz 5 mA 100 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% 1mm (.039 in.) PBTP
90V - 250V 50/60Hz 5 mA 180 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% 1mm (.039 in.) PBTP
90V - 250V 50/60Hz 5 mA 180 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% 1mm (.039 in.) PBTP
90V - 250V 50/60Hz 5 mA 180 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% 1mm (.039 in.) PBTB
M 30
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
x 1, 5
LED
5 60 0
M 30 x 1, 5
LED
62 Style Connector 3-pin, Mini style, 25mm (1.0 in.) supplied with Brass, Nickel Plated (BN) locknuts.
26
LED (66/68 CN)
10
25
91
56
M 30 x 1
66/67/68 Style Connectors The 66/67 connectors are 4-pin, (68 connector, 3-pin), Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts . The 67 Connector is clear, offering 360 LED viewing.
LED (67 CN)
58
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
70
50
PREVIOUS
1.0 mm 5.0 mm 6.0 mm 8.0 mm 12.0 mm 23.0 mm 28.0 mm = .04 in. = .20 in. = .23 in. = .31 in. = .47 in. = .90 in. =1.10 in.
HOME
29.0 mm 34.0 mm 35.0 mm 40.0 mm 43.0 mm 50.0 mm 60.0 mm = = = = = = = 1.14 in. 1.34 in. 1.37 in. 1.57 in. 1.69 in. 1.97 in. 2.36 in.
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) AC Cable Assemblies for Quick Disconnect Sensors 62 Connector 8000-5030 66/67 Connector 8000-5060 66/67 Connector 8000-5070 68 Connector 8000-5130 68 Connector 8000-5140 PVC, Straight PVC, Right Angle PVC, Straight PVC Straight Right Angle
Metric/in. Conversion Table
This table converts millimeters to inches in reference to the illustrations included on these pages
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M30 Non-Flush Mount
15mm (0.59 in.)
Cable
9956-1400
Mounting Brackets - see Pages 114-115 67
9956-1467
62
9956-1462
66
9956-1466
68
9956-1468
9956-1800
9956-1868
90V - 250V 50/60Hz 5 mA 180 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% 1.5mm (.0596in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% 1.5mm (.059 in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .4mm (.016in.) PBTB
90V - 250 50/60Hz 5 mA 180 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .4mm (.016in.) PBTB
90V - 250V 50/60Hz 5 mA 180 mA 8V 3A/220V 1.5mA/110V 1A 15Hz/220V 15% 10% .5mm (.02in.) PBTB
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
Fixed Cable
BR
Note: Sensor dimensions in mm.
M 30 x 1, 5
Fixed Cable
BR
BL LOAD Yellow/GRN
BL LOAD Yellow/GRN
LED
Normally Open
Normally Closed
60
38
12
62 Connector
1 GRN WHT 2 3 BLK LOAD
M 30 x 1, 5
LED
Normally Open
12
66/67 Connector
66/67 Connector
Yell/GRN 4 3 BL 1
56
25
91
Yell/GRN 4
3 BL
10
LED (67 CN)
68 Connector
Red/WHT 3 2 Red GRN LOAD GRN 1
12
3 70 8
(c)Altech
Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
26
1
2
LOAD BLK
2
BLK LOAD
Normally Open
LED (66/68 CN)
Normally Closed
M 30 x 1, 5
68 Connector
Red/WHT 3 2 Red LOAD 1
Normally Open
Normally Closed
59
PREVIOUS AC - 2 WIRE - EXTENDED VOLTAGE RANGE - Brass, Nickel Plated (BN), and TROGAMID T Cylindrical,Threaded, 20-250V AC, 500 mA, 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Temperature Range: -25 to 70C (-13 to 158F)
* Higher Current Rating * Wider Voltage Range * Carries mark
M12 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Normally Open Normally Closed Voltage Range Operating Frequency Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Short Term Current (20 ms, 1Hz) Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material Housing Material Cable
9924-0500
M12 Non-Flush Mount
4mm (.16 in.)
68 Cable
9924-0700
2mm (.08 in.)
Cable
9924-1100 9924-0568
Cable
9924-1000
68
9924-0768
9924-0400
9924-1300
9924-0468
9924-0900
9924-1200
9924-0968
20V-250V 50/60Hz 2 mA 300 mA 5V 2mA 2A 15Hz 15% 10% .20mm (.008 in.) PBTP Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 300 mA 5V 2mA 2A 15Hz 15% 10% .20mm (.008 in.) PBTP Trogamid T
20V - 250V 50/60Hz 2 mA 300 mA 5V 2mA 2A 15Hz 15% 10% .20mm (.008 in.) PBTP Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 300 mA 5V 2mA 2A 15Hz 15% 10% .40mm (.016 in.) PBTB Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 300 mA 5V 2mA 2A 15Hz 15% 10% .40mm (.016 in.) PBTB Trogamid T
20V - 250V 50/60Hz 2 mA 300 mA 5V 2mA 2A 15Hz 15% 10% .40mm (.016 in.) PBTB Nickel Plated Brass
M 12 x 1
M 12 x 1
Nickel Plated Brass Housings Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with non-metallic locknuts for Trogamid T housings and Nickel Plated (BN) locknuts for Nickel Plated Brass housings. Trogamid T Housings
LED
LED
6 70 0
70
M 12 x 1 6 M 12
54
6
x 1 70
LED LED
80
80
64
M
M 12 x 1
12 x 1
60
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
80
80
54
68 Style Connectors 3-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
LED
LED
60
6
PREVIOUS
HOME
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) AC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table 1.0 mm 6.0 mm 8.0 mm 12.0 mm 54.0 mm = .04 in. = .23 in. = .31 in. = .47 in. =2.12 in. 60.0 mm 64.0 mm 70.0 mm 80.0 mm = = = = 2.36 in. 2.52 in. 2.75 in. 3.15 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
68 Connector 68 Connector
8000-5130 PVC Straight 8000-5140 Right Angle
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M18 Flush Mount
5mm (0.2 in.)
Cable
9921-1200
M18 Non-Flush Mount
8mm (0.3 in.)
68 Cable
9921-1500
Mounting Brackets - see Pages 114-115
Cable
9921-2000
Cable
9921-2200
68
9921-1568
9921-1268
9921-1300
9921-2100
9921-1368
9921-1700
9921-2300
9921-1768
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% .50mm (.02 in.) PBTB Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% .50mm (.02 in.) PBTB Trogamid T
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% .50mm (.02 in.) PBTB Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% .8mm (.039 in.) PBTB Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% .8mm (.039 in.) PBTB Trogamid T
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% .8mm (.039 in.) PBTB Nickel Plated Brass
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
Fixed Cable
BR
Note: Sensor dimensions in mm.
M
LED
8
5 60 0
60
42
LED
LED
8
M 18 x 1
LED
M 18 x 1 7 80 0 62
18 x 1
M 18 x 1 80
Fixed Cable
BR BL LOAD Yellow/GRN BL LOAD Yellow/GRN
Normally Open
Normally Closed
Fixed Cable
BR
Fixed Cable
BR
BL LOAD BL
LOAD
Normally Open
Normally Closed
M
M 18 x 1
LED
18
68 Connector
Red/WHT
x 1
68 Connector
Red/WHT 3 2 Red GRN 1 LOAD
LED
8
3
2 Red GRN LOAD
60
5 80 2
1
80
Normally Open
Normally Closed
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
61
PREVIOUS AC - 2 WIRE - EXTENDED VOLTAGE RANGE - Brass, Nickel Plated (BN), and TROGAMID T Cylindrical,Threaded, 20-250V AC, 500 mA, 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Temperature Range: -25 to 70C (-13 to 158F)
* Higher Current Rating * Wider Voltage Range * Carries mark
M30 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Normally Open Cable
9916-2600
10mm (0.39 in.)
Cable
9916-2900
68
9916-2668
Normally Closed Voltage Range Operating Frequency Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Short Term Current (20 ms, 1Hz) Switching Frequency Hysterisis Temperature Drift Repeatability Front Cap Material Housing Material
9916-2100
9916-2400
9916-2168
20V-250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% 1mm (.039 in.) PBTP Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% 1mm (.039 in.) PBTP Trogamid T
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% 1mm (.039 in.) PBTP Nickel Plated Brass
M 30 x 1, 5
Nickel Plated Brass Housings Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with non-metallic locknuts for Trogamid T housings and Brass, Nickel Plated (BN) locknuts for Nickel Plated Brass housings. Trogamid T Housings
LED
5 60 0
M 30 x 1, 5
LED
7 80 0
M 30 x 1, 5
LED
68 Style Connectors 3-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
62
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
80
60
PREVIOUS
HOME
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) AC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table 1.5 mm 12.0 mm 30.0 mm 38.0 mm 48.0 mm = .06 in. = .47 in. =1.18 in. =1.50 in. =1.89 in. 50.0 mm 58.0 mm 60.0 mm 80.0 mm = = = = 1.96 in. 2.28 in. 2.36 in. 3.15 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
68 Connector 68 Connector
8000-5130 PVC Straight 8000-5140 Right Angle
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M30 Non-Flush Mount
15mm (0.59 in.)
Cable
9916-2700
Mounting Brackets - see Pages 114-115
Cable
9916-3000
68
9916-2768
9916-2300
9916-2500
9916-2368
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% 1.5mm (.059 in.) PBTB Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% 1.5mm (.059 in.) PBTB Trogamid T
20V - 250V 50/60Hz 2 mA 500 mA 5V 2mA 8A 15Hz 15% 10% 1.5mm (.059 in.) PBTB Nickel Plated Brass
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
Note: Sensor dimensions in mm.
Fixed Cable Fixed Cable
BR
M 30 x 1, 5
BL LOAD Yellow/GRN BR
LED
BL LOAD Yellow/GRN
Normally Open
38
60
12
Normally Closed
M 30 x 1, 5
Fixed Cable
BR
Fixed Cable
BR
LED
12
BL LOAD BL
LOAD
Normally Open
80
Normally Closed
58 M 30 x 1, 5
68 Connector
Red/WHT
68 Connector
Red/WHT 3 2 Red GRN 1 LOAD
LED
3 2 Red GRN 1 LOAD
4 80 8
12
Normally Open
Normally Closed
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
63
PREVIOUS AC - 2 WIRE - WELD IMMUNE Brass, Nickel Plated (BN), Cylindrical,Threaded, 20-250V AC, 300mA/500mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Temperature Range: -25 to 70C (-13 to 158F)
* Circuitry that protects for electro-magnetic interference * Flush models have teflon ceramic coatings to protect for weld slag * Carries mark
M12 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Normally Open Normally Closed Voltage Range Operating Frequency Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Short Term Current (20 ms, 1Hz) Switching Frequency (at Resistance Load of 150 mA) Hysterisis Temperature Drift Repeatability Front Cap Material Housing Material
9952-5840
M12 Non-Flush Mount
4mm (.16 in.)
48 Cable
9952-5900
2mm (.08 in.)
Cable
9952-5848
68
9952-5968
9952-5640
9952-5648
9952-5700
9952-5768
20V-250V 50/60Hz 2 mA 300 mA 5V 2 mA 2A 15 Hz 15% 10%
20V - 250V 50/60Hz 2 mA 300 mA 5V 2 mA 2A 15 Hz 15% 10% .10mm (.004 in.) Teflon Teflon Plated Brass
20V - 250V 50/60Hz 2 mA 300 mA 5V 2 mA 2A 15Hz 15% 10% .2mm (.008 in.) PBTB Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 300 mA 5V 2 mA 2A 15 Hz 15% 10% .2mm (.008 in.) PBTB Nickel Plated Brass
.10mm (.004 in.)
Teflon Teflon Plated Brass
M 12 x 1
10
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
LED
70 M 12 x 1
LED
48/68 Style Connector 3-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
64
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
10
80
6
6
PREVIOUS
HOME
NEXT
FIND IT
Accessories
2 meter (6 ft. 6 in.) AC Cable Assemblies for Quick Disconnect Sensors
Metric/in. Conversion Table 1.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm 18.0 mm 60.0 mm 70.0 mm 80.0 mm = .04 in. = .23 in. = .31 in. = .39 in. = .47 in. = .70 in. =2.36 in. =2.75 in. =3.15 in.
This table converts millimeters to inches in reference to the illustrations included on these pages
48/68 Connector 8000-5130 PVC, Straight 48/68 Connector 8000-5140 Right Angle
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
M18 Flush Mount
5mm (.20 in.)
Cable
9954-5840
M18 Non-Flush Mount
8mm (.31 in.)
Mounting Brackets - see Pages 114-115 68
9954-5968
48
9954-5848
Cable
9954-5900
9954-5640
9954-5648
9954-5700
9954-5768
20V - 250V 50/60Hz 2 mA 500 mA 5V 2 mA 8A 15 Hz 15% 10% .25mm (.01 in.) Teflon Teflon Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2 mA 8A 15 Hz 15% 10% .25mm (.01 in.) Teflon Teflon Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2 mA 8A 15 Hz 15% 10% .4mm (.016 in.) PBTB Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2 mA 8A 15 Hz 15% 10% .4mm (.016 in.) PBTB Nickel Plated Brass
Note: Sensor dimensions in mm.
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
M M 1 18 x x 1
Fixed Cable
BR
LED
8
BL LOAD
60
Yellow/GRN
Normally Open
10
M M 18 18 x 1
48/68 Connector
Red/WHT
LED
8
3
2 Red GRN LOAD
80
1
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
10
Normally Open
65
PREVIOUS AC - 2 WIRE - WELD IMMUNE Brass, Nickel Plated (BN), Cylindrical,Threaded, 20-250V AC, 300/500mA 1 LED for Output Energized
HOME
NEXT
FIND IT
* Circuitry that protects for electro-magnetic interference * Flush models have teflon ceramic coatings to protect for weld slag * Carries mark
* IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Temperature Range: -25 to 70C (-13 to 158F)
M30 Flush Mount
Sensing Distance
Cable or Connector Style Cat. No. Normally Open Normally Closed Voltage Range Operating Frequency Supply Current Max. Load Current Voltage Drop Across Sensor Max. Leakage Currrent Short Term Current (20 ms, 1Hz) Switching Frequency (at Resistance Load of 150 mA) Hysterisis Temperature Drift Repeatability Front Cap Material Housing Material
9956-5840
M30 Non-Flush Mount
15mm (.59 in.)
Cable
9956-5900
10mm (.39 in.)
Cable 48
9956-5848
68
9956-5968
9956-5640
9956-5648
9956-5700
9956-5768
20V-250V 50/60Hz 2 mA 500 mA 5V 2 mA 8A 15 Hz 15% 10% .5mm (.02 in.) Teflon Teflon Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2 mA 8A 15 Hz 15% 10% .5mm (.02 in.) Teflon Teflon Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2 mA 8A 15 Hz 15% 10% .75mm (.03 in.) PBTB Nickel Plated Brass
20V - 250V 50/60Hz 2 mA 500 mA 5V 2 mA 8A 15Hz 15% 10% .75mm (.03 in.) PBTB Nickel Plated Brass
Note: Sensor dimensions in mm.
M 30 x 1, 5
Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Supplied with Brass, Nickel Plated (BN) locknuts.
LED
10
80
12
M 30 x 1, 5
66
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
10
80
12
48/68 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts.
LED
PREVIOUS
Metric/in. Conversion Table 1.5 mm 10.0 mm 12.0 mm 30.0 mm 80.0 mm = .06 in. = .39 in. = .47 in. =1.18 in. =3.15 in.
HOME
NEXT
FIND IT
This table converts millimeters to inches in reference to the illustrations included on these pages
Accessories
2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 48/68 Connector 8000-5130 PVC, Straight 48/68 Connector 8000-5140 Right Angle
Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information
Mounting Brackets - see Pages 114-115
Wiring Diagrams
Note: Wire colors are applicable to cable purchased from Altech
Fixed Cable
BR
BL LOAD Yellow/GRN
Normally Open
48/68 Connector
Red/WHT 3 2 Red GRN 1 LOAD
Normally Open
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490
67

▲Up To Search▲

Price & Availability of 9914-0500

	To Download 9914-0500 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .